Job Recruitment at Padua Petroleum Nigeria Limited (PPNL), 8th May, 2019

Job Title: Mech/Piping Designer
Location: Lagos

Duties and Responsibilities

• Ensuring planned engineering (process) progress with respect to the engineering deliverables for Tenders (as required) and awarded Projects, process engineering planning & scheduling, preparation of progress reports, manpower & resource forecasts, time schedules of engineers, utilization of resources effectively & efficiently.
• Process Design & Detail Engineering including performing process simulations, design calculations, Process Optimization, sizing & selection of equipment etc. for Tenders (as required) and for awarded Projects. Review of Clients tender documents, specifications, datasheets, verification of FEED design & calculations.
• Preparation of various engineering deliverables (Drawings & Documents) such as Process Flow Diagrams, P & I Diagrams, Process Datasheets, Equipment Specifications, Cause & Effect Diagrams, control philosophies, shutdown philosophies, HAZOP Studies & reports, Operation & maintenance manuals etc. and providing necessary engineering inputs to the other disciplines and other departments.
• To ensure proper division of work & responsibility among the process engineers, providing proper guidance & integration of work done, ensuring good, positive & healthy working nature among the team of engineers to ensure optimum productivity & effciency.
• Preparation & Issue of RFQ’s, evaluation of vendor’s quotations, clarifications, Technical Bid Analysis etc.
• Review of vendor’s documents, drawings, datasheets, specifications and calculations.
• Ensuring planned engineering (process) progress with respect to the engineering deliverables for Tenders (as required) and awarded Projects, process engineering planning & scheduling, preparation of progress reports, manpower & resource forecasts, time schedules of engineers, utilization of resources effectively & efficiently.
• Process Design & Detail Engineering including performing process simulations, design calculations, Process Optimization, sizing & selection of equipment etc. for Tenders (as required) and for awarded Projects. Review of Clients tender documents, specifications, datasheets, verification of FEED design & calculations.
• Preparation of various engineering deliverables (Drawings & Documents) such as Process Flow Diagrams, P & I Diagrams, Process Datasheets, Equipment Specifications, Cause & Effect Diagrams, control philosophies, shutdown philosophies, HAZOP Studies & reports, Operation & maintenance manuals etc. and providing necessary engineering inputs to the other disciplines and other departments.
• To ensure proper division of work & responsibility among the process engineers, providing proper guidance & integration of work done, ensuring good, positive & healthy working nature among the team of engineers to ensure optimum productivity & effciency.
• Preparation & Issue of RFQ’s, evaluation of vendor’s quotations, clarifcations, Technical Bid Analysis etc.
• Review of vendor’s documents, drawings, datasheets, specifications and calculations.
• Generate both Equipment and Piping General Arrangement drawings, making corrections as required.
• Generate and Review Piping Isometrics, Pipe Support Drawings, Plot Plans, Overall Key Plan, based on details provided on PEFS (P&ID) as well as relevant Codes and Standards.
• Generate and Review shop fabrication drawings for compliance with relevant codes and standards and forecast reports and other associated documentation to Lead Engineer for reviews and or correction.
• Good knowledge of engineering design codes like, ASME, API, ANSI, ASTM, NFPA, BS, TEMA & and standards like Shell DEP, Total GS, Mobil GP, Chevron CES, etc.
• Participate in Design Reviews, 3D Model, HAZOP, HAZID and constructability reviews.
• Review of vendor’s documents, drawings, datasheets, and specifications.
• Review and update all deliverables issued to clients to ensure they meet and/or exceed clients’ expectations at all times.
• Ensure participation in all QHSSE programmes.
• Interface and communicate with other departments to achieve project goals
• Deputize for the lead engineer in his/her absence.
• Intervene and/or report unsafe acts / conditions and near misses

Qualification & Experience

• A relevant Engineering Degree or equivalent.
• Hands on experience in software such as AutoCAD, Caesar II, Auto Pipe, PV-Elite, PDMS, Auto PLANT, HTRI.
• Must be familiar with Microsoft Office especially Excel, Access & Word and other applicable software.
• Strong organizational skills, technical competence and attention to details.
• At least ten (10) years of progressive experience in design and facilities engineering both Onshore and Offshore, Green and Brown fields in the oil and gas industry.
• Field engineering and construction experience is an asset.
• Competent oral (English) and written communication skills
• Knowledge of industry/regulatory standards
• Proficiency in reading and understanding technical drawings/diagrams
• Develop, mentor and coach junior engineers.
• Management techniques and delegation of tasks
• Inter Personal skills communication and effective listening
• Leadership skill and ability to supervise and check the work of others successfully.
• Thorough document review, decision-making and time management skills

Job Title: Pipeline Designer
Location: Lagos

Duties and Responsibilities

• Prepare and update Overall Pipeline route Drawings, Route Proposal Drawings, Alignment Sheets / Approach Drawings, Bulk Material Take-Offs.
• Generate Pipeline Isometrics.
• Prepare shop fabrication drawings for compliance with relevant codes and standards and forecast reports and other associated documentation.
• Prepare specifications and equipment datasheets for line pipe, pumps, valves and tanks based on details provided on PEFS (P&ID) as well as relevant Codes and Standards.
• Isometric checking against P&ID, Specifications, Line Attributes and Bill of Materials.
• Good knowledge of engineering design codes like, ASME, API, ANSI, ASTM, NFPA, BS, TEMA & and standards like Shell DEP, Total GS, Mobil GP, Chevron CES, etc.
• Participate in Design Reviews, 3D Model, HAZOP, HAZID and constructability reviews.
• Review of vendor’s calculations, reports, drawings, datasheets, specifications and calculations.
• To ensure deliverables are issued to meet the set targets.
• Ensure participation in all QHSSE programmes.
• Interface and communicate with other departments to achieve project goals
• Intervene and/or report unsafe acts / conditions and near misses.

Qualification & Experience

• A relevant Engineering degree or equivalent.
• Hands on experience in software such as AutoCAD, Caesar II, Auto Pipe, PV-Elite, PDMS, Auto PLANT.
• Must be familiar with Microsoft Office especially Excel, Access & Word and other applicable software.
• Strong organizational skills, technical competence and attention to details.
• At least eight (8) years of progressive experience in design and facilities engineering both Onshore and Offshore, Green and Brown fields in the oil and gas industry
• Field engineering and construction experience is an asset.
• Competent oral (English) and written communication skills
• Knowledge of industry/regulatory standards
• Proficiency in reading and understanding technical drawings/diagrams
• Inter Personal skills communication and effective listening
• Leadership skill and ability to supervise and check the work of others successfully.

Job Title: Senior Mech/Piping Engineer
Location: Lagos

Duties and Responsibilities

• Ensuring planned engineering (process) progress with respect to the engineering deliverables for Tenders (as required) and awarded Projects, process engineering planning & scheduling, preparation of progress reports, manpower & resource forecasts, schedules of engineers, utilization of resources effectively and efficiency
• Process Design & Detail Engineering including performing process simulations, design calculations,
• Process Optimization, sizing & selection of equipment etc. for Tenders (as required) and for awarded Projects.
• Review of Clients tender documents, specifications, datasheets, verification of FEED design & calculations.
• Preparation of various engineering deliverables (Drawings & Documents) such as Process Flow
• Diagrams, P & I Diagrams, Process Datasheets, Equipment Specifications, Cause & Effect Diagrams, control philosophies, shutdown philosophies, HAZOP Studies & reports, Operation & maintenance manuals etc. and providing necessary engineering inputs to the other disciplines and other departments.
• To ensure proper division of work & responsibility among the process engineers, providing proper guidance & integration of work done, ensuring good, positive & healthy working nature among the team of engineers to ensure optimum productivity & efficiency.
• Preparation & Issue of RFQ’s, evaluation of vendor’s quotations, clarifications, Technical Bid Analysis etc.
• Review of vendor’s documents, drawings, datasheets, specifications and calculations.
• Ensuring planned engineering (process) progress with respect to the engineering deliverables for Tenders (as required) and awarded Projects, process engineering planning & scheduling, preparation of progress reports, manpower & resource forecasts, time schedules of engineers, utilization of resources effectively & efficiently.
• Process Design & Detail Engineering including performing process simulations, design calculations, Process Optimization, sizing & selection of equipment etc. for Tenders (as required) and for awarded Projects. Review of Clients tender documents, specifications, datasheets, verification of FEED design & calculations.
• Preparation of various engineering deliverables (Drawings & Documents) such as Process Flow Diagrams, P & I Diagrams, Process Datasheets, Equipment Specifications, Cause & Effect Diagrams, control philosophies, shutdown philosophies, HAZOP Studies & reports, Operation & maintenance manuals etc. and providing necessary engineering inputs to the other disciplines and other departments.
• To ensure proper division of work & responsibility among the process engineers, providing proper guidance & integration of work done, ensuring good, positive & healthy working nature among the team of engineers to ensure optimum productivity & efficiency.
• Preparation & Issue of RFQ’s, evaluation of vendor’s quotations, clarifications, Technical Bid Analysis etc.
• Review of vendor’s documents, drawings, datasheets, specifications and calculations.
• Prepare and Review General Arrangement drawings, making corrections as required.
• Prepare and Review Piping Isometrics, make corrections where necessary.
• Review shop fabrication drawings for compliance with relevant codes and standards and forecast reports and other associated documentations.
• Prepare equipment datasheets based on details provided on PEFS (P&ID) as well as relevant Codes and Standards.
• To ensure proper division of work & responsibility among the mechanical / piping engineers and designers, providing proper guidance & integration of work done, ensuring good, positive & healthy working nature among the team of engineers to ensure optimum productivity & efficiency.
• Preparation & Issue of Scope of work (input to RFQ), evaluation of vendor’s quotations, clarifications, Technical Bid Analysis etc.
• Good knowledge of engineering design codes like, ASME, API, ANSI, ASTM, NFPA, BS, TEMA & and standards like Shell DEP, Total GS, Mobil GP, Chevron CES, etc.
• Participate in Design Reviews, 3D Model, HAZOP, HAZID and constructibility reviews.
• Review of vendor’s documents, calculations, reports, drawings, datasheets, specifications and calculations.
• To ensure deliverables are issued to meet the set targets.
• Review and update all deliverables issued to clients to ensure they meet and/or exceed clients’ expectations at all times.
• Ensure participation in all QHSSE programmes.
• Interface and communicate with other departments to achieve project goals
• Deputize for the lead engineer in his/her absence.
• Intervene and/or report unsafe acts / conditions and near misses

Qualifications & Experience

• A relevant engineering degree or equivalent.
• Hands on experience in software such as AutoCAD, Caesar II, Auto Pipe, PV-Elite, PDMS, Auto PLANT, HTRI.
• Must be familiar with Microsoft Office especially Excel, Access & Word and other applicable software.
• Strong organizational skills, technical competence and attention to details.
• At least ten (10) years of progressive experience in design and facilities engineering both Onshore and Offshore, Green and Brown fields in the oil and gas industry
• Field engineering and construction experience is an asset.
• Competent oral (English) and written communication skills
• Knowledge of industry/regulatory standards
• Proficiency in reading and understanding technical drawings/diagrams
• Develop, mentor and coach junior engineers.
• Management techniques and delegation of tasks
• Inter Personal skills communication and effective listening
• Leadership skill and ability to supervise and check the work of others successfully.
• Thorough document review, decision-making and time management skills