JOB TITLE: WELDER/PIPE FITTER
PRODUCTIVE PEOPLE LTD – Lagos
Job Objective:
Responsible for assembling and installing pipe systems, pipe supports, and hydraulic and pneumatic equipment. Installs pipe for steam, hot water, heating, cooling, lubricating, sprinkling, and industrial production and processing systems.
Reports to: Project Leader
Location: Any location within and outside Nigeria where SCSP has project sites.
Key Roles & Responsibilities:
Operate safety equipment and use safe work habits.
Weld components in flat, vertical, or overhead positions.
Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
Detect faulty operation of equipment or defective materials and notify supervisors.
Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
Weld separately or in combination, using aluminium, stainless steel, cast iron, and other alloys
Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
Mark or tag material with proper job number, piece marks, and other identifying marks as required.
Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter.
Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
Remove rough spots from workpieces, using portable grinders, hand files, or scrapers.
Gouge metals, using the air-arc gouging process.
Guide and direct flames or electrodes on or across workpieces to straighten, bend, melt, or build up metal.
Estimate materials needed for production and manufacturing and maintain required stocks of materials.
Position and secure workpieces, using hoists, cranes, wire, and banding machines or hand tools.
Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
Preheat workpieces prior to welding or bending, using torches or heating furnaces.
Use fire suppression methods in industrial emergencies.
Set up and use ladders and scaffolding as necessary to complete work.
Mix and apply protective coatings to products.
Operate metal shaping, straightening, and bending machines, such as brakes and shears.
Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
Operate brazing and soldering equipment.
Key Interfaces
Project Lead
ELV/Gas Team Lead
Water System Team Lead
Draughtsman
Travel Time
This position requires 80% Travel Time.
Language
English is compulsory. Other international or Nigerian languages will be added advantage.
Desired Skills and Experience
Job Attributes:
Qualifications
City &Guilds, Diploma, or Vocational training in job-related area.
Minimum Experience:
Three years previous work-related skill, knowledge or experience is desirable. Fire safety engineering experience is added advantage.
Competencies
Mechanical — Knowledge of machines and tools, including their designs, uses, repair, and maintenance.
Design — Knowledge of design techniques, tools, & principles involved in production of precision technical plans, blueprints, drawings, and models.
Mathematics — Knowledge of arithmetic, algebra, geometry, calculus, statistics, and their applications.
How to Apply
Leave a Reply