Career Opportunities at Deep Blue Energy Services Limited (DBESL)

Deep Blue Energy Services Limited (DBESL), is a resource and solution management company that specializes in assisting international/Local companies in identifying Potential market opportunities, assisting with permits, sourcing highly skilled employees, bidding on and negotiating contracts and navigating the often complex political and policy environment of many sub Saharan African countries.

We are recruiting to fill the below position:




Job Title: Offshore Company Representative

Location: Nigeria
Job Type: Full-Time
Department: Category Oil & Gas

Job Description
The COMPANY Representative is designated Responsible for Safety and Environment on Site delegate(RSES-D) and is directly accountable for the safe execution of the offshore works.

Installation Activities
The SERVICE holder is Contractor’s focal point for day to day activity onboard the installation vessel. In a narrow coordination with the Installation team based in Lagos, the SERVICE holder shall:

• Supervise that the agreed procedures are respected during all the offshore presence of the installation vessel on
• Client’s site,mainly for the following activities performed onboard the vessel by Contractor:
  • Supply/Barge activities along side or at close vicinity of the vessel
  • Transfer of equipment onboard the vessel
  • Deck operations
  • Lifting, over boarding, lowering and landing of subsea structures
  • Subsea/ ROV works
• Ensure that any modification of the agreed procedure is covered by the Management of Change agreed process.
• Sign in due time and when satisfactory preparation level has been achieved each specific Ready For Installation certificate.
• Communicate with onshore support to:
  • Plan the coming operations
  • Mobilise offshorerelevantpersonnelfrom other packages(i.e.SPS & UmbilicalContractorPersonnel)
• Communicate, in accordance with the defined project procedures, with COMPANY Representative acting onboard other vessel(s) working at Site incase of co-activities or SIMOPS activities.
• Ensure,when relevant, the interface onboard the vessel between MWS Representative and Contractor and ensure, in accordance with MWS agreed scope, that relevant MWS certificate has been issued.
• Ensure that ICAPS are filled, signed and transferred to Contractor’s ICAPS Coordinator 
• Ensure recording of daily report activities onboard and approves the daily report issued by CONTRACTOR. This reporting shall include activities onboard the vessel but also any other activities interfacing with his own activities.

The SERVICE holder will lead the COMPANY supervision team on board the vessel.

HSE

• The SERVICE holder is responsible, on board the installation vessel, to ensure that COMPANY HSE standards are applied throughout the operations and participates to hazard assessments for any activity involving the vessel.
• The company Representative shall lead the offshore team and shall demonstrate exemplary HSE behavior to ensure all works on the vessel shall be conducted in as a femanner according to the Total Golden Rules,CONTRACTOR HSE rules and international and local regulations.
• He is the COMPANY’s focal point in case of an emergency on board the vessel and ensures proper implementation of the emergency response procedures. In particular the UFR OFFSHORE COMPANY REPRESENTATIVE shall: Regularly call meeting store mind and moti

Qualifications

• Sound background in Oil and Gas installations, Marine Operations and Offshore Construction.
• Minimum 10 years experience in Design and Installation of Subsea/Deepwater Steel Structures or previous exposure to EPCI projects.
• Good knowledge of international structural design codes/standards and general specifications.
• Good organizational skills
• Experience in leadership and team management
• Fluent in English (verbal and written).
• BOSIET certificate

How to Apply

Click here to apply online






Job Title: Offshore Coating/Field Joint Coating Supervisor

Location: Nigeria
Job Type: Contract 
Category: Oil & Gas

Activities

• The Offshore FJC supervisor is responsible for all Offshore FJC activities during his shift and is directly accountable for the correct application and quality of the field joints.
  

Installation Activities

• As the specialist in Coating and Field joint coating process, on board the UFR CTR flow lines laying vessel the Coating Interpreter shall:
• Make sure that applicable coating and FJC documentations are approved and accessible on board,
• Make sure that all Raw Materials certificates are in line with project specifications requirements and available in case of needed
• Make sure that all Raw Materials are stored and monitored as per approved project specifications
• Make sure that factory parent coating cut back areas are well prepared and fit-up are acceptable as per specifications.
• Make sure that Raw materials and equipments used for FJC process are same or similar to the one used for the qualification process.
• Ensure that all factory pipelines coatings and previous FJC coatings are well inspected by CONTRACTOR and all coating damages are repaired prior pipelines installations.
• Supervise all FJC processing and make sure it is done according to good workmanship and in safety manner.
• See all the FJC done during his shift, make his own interpretation of the results and agree with CONTRACTOR representative about the status to be given on the joint. In the absence of TPA on-board the vessel, the FJC Supervisor will act as the highest technical authority on board to validate FJC interpretation.
• Inform the COMPANY Main Representative about all shortcomings, problems and/or major defects detected in the fabrication.
• Ensure that the traceability of FJC results is well maintained onboard through appropriate QC records. Collect the inspection reports carried out during its shift and file them properly on board available for the CY main representative.

During the mobilisation phase, he/she shall be able to judge the capability and skilfulness of applicators in order to support the following:

• Inspection and expertise of any Coating repair on Factory coating and previous FJC carried out as per specifications:
  • Evaluation of the specific coating damage to be repaired on board if they are not specified in the FJC documents.
  • Assessment of applicators
  • Collection of applicators certificates
  • Follow-up of applicators

HSE:

• Safety is the core value of the Client and shall be the first and foremost priority for all COMPANY offshore personnel.
• The OFFSHORE FJC SUPERVISOR shall demonstrate exemplary HSE behavior and ensure that all acts under his supervision are conducted in a safe manner according to the Golden Rules, CONTRACTOR HSE rules and Agreement.

Qualifications

• Post-graduate, Technician in polymers materials
• FROSIO qualification at least level III – preferably – or NACE level III peer review
• Fully conversant with ISO, ASTM and others international Standards
• Having a solid experience in Coating and FJC process especially for the wet insulation coating 5LPP, IMPU processes.
• Fluent in English (verbal and written).
• BOSIET certificate

How to Apply

Click here to apply online




Job Title: Site Lifting Specialist

Location: Nigeria
Job Type: Contract 
Category: Oil & Gas

Job Description

• The Site Lifting Specialist will be based on board Contractor vessels during offshore installation activities at SITE. The position is rotational.
• Support of all Client’s Package Construction activities in all Contractor installation vessels in addition to any other vessel(s)or any port(s) where loading and unloading onto/from vessel(s) are carrying out as may be requested by Management.

The holder of the position shall in particular be responsible for:

• Supporting the Vessel Company Representative/RSES-D and HSE Team on board the vessels to ensure all lifting operations are carried out safely inline with Client and Project HSE expectations and objectives.
• Continually liaising with CPLO to ensure that lifting and handling standards within Project specification are consistently respected on offshore installation activities at SITE.
• Ensuring that Company Rules and Procedures(Lifting Management System) regarding handling & lifting operations are well understood and applied by the Contractors.
• Participating/assisting the CPLO in the annual evaluation and review of approved 3rd Party Lifting Equipment
• Certifiers list which will be deployed on offshore installation activities at SITE.
• Providing expertise in day to day handling and lifting activities on offshore installation activities at SITE, which include: categorizing lifts, hazard identifications and risk assessment and technical review(lifting procedures and organizations).
• Acting as Company Lifting representative for lifting operations on offshore installation activities at SITE.
• Working with Contractors to ensure technically acceptable lifting procedures and other related documentations are prepared in advance of lifting activities.
• Assisting the CPLO during assessment of Contractors’ personnel competence to carryout lifting of handling operations.
• Reviewing Lifting Operations Plans for all critical lifting or handling operations on offshore installation activities at SITE.
• Performing tool box talks prior to the beginning of each working shift or when critical lifts are being carried out.
• Participating in the actual lifting activities and carrying out post-SERVICE debriefs in order to Agreement

Qualifications

• The service holder must be capable of ensuring the application of handling and lifting procedures implemented at the offshore installation activities at SITE.
• Has valid certificates of trainings BOSIET or FOET or HUET & SAS
• The service holder must have knowledge of all types of cranes(e.g.crawler, mobile crane without riggers & pedestal, barge crane, offshore cranes with AHC) and lifting operations that occur at offshore installation activities at SITE.
• Knowledge of all aspects of lifting engineering including such items as onshore and offshore load charts, effects of ground bearing capacity, barge stability.
• The ability to prepare(or check) lifting engineering calculations and risk assessments.
• Hold appropriate technical qualification(s) and have sufficient practical experience to demonstrate technical competence.
• Good knowledge of the English Language for effective communication

How to Apply

Click here to apply online

Deadline: 9th November, 2016.