Fresh Jobs at Halliburton Energy Services Nigeria Limited, 3rd Sept., 2019

Halliburton Energy Services Nigeria Limited – In the coming decades, energy resources will become increasingly difficult to find and access. As one of the world’s largest providers of products and services to the upstream energy industry, Halliburton serves the life cycle of the well.

We are seeking for qualified candidates with relevant experience to fill the position below:

Job Title: Financial Controller

Job Ref No.: A325/ESG/19
Location: Nigeria

Job Description/Requirements

Analyzes and recommends alternative sources of capital that the company should use to meet its needs.
Maintains relationships with those parties necessary to gain knowledge of new capital products on the market and how they might fit the company, such as investment bankers and rating agencies.
Responsible for the control process to maintain compliance with debt covenants or similar restrictions and company policy covering such related areas as ease buy decisions.
Provides leadership in arranging financial services that expand the business relationship with company customers, such as credit approval, trade financing through special terms or arranged through third parties, letters of credit, guarantees, or performance/bid bonds.
Maintains relationships with banks, governmental sources of trade finance, and other credit sources.
Works closely with the Project Finance group to provide innovative options to customers.
Responsible for reviewing proposals and/or contracts as appropriate for credit and/or contracts as appropriate for credit and other financial issues.
Completion of an undergraduate degree or its equivalent in Engineering preferred or combination of education and experience sufficient to successfully perform the essential functions of the job.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Account Representative, Business Development

Job Ref No.: R504/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, utilizes subject matter expertise and established client relationships to sell Company products and services and achieve maximum profitability and market penetration/share.
Matches the Company’s technical, commercial and operational capabilities to customer needs through developing a clear understanding of customer’s business & technical issues and drivers and effective delivery of technical sales presentations and personal working relationships.
Calls on assigned and non-assigned accounts to effectively promote and sell the Company’s products and services.
Plays an active role in the business planning process.
Job role directly create value via personal relationships.
Skills typically acquired through completion of an undergraduate degree in Business Administration, Marketing, Engineering, or similar disciplines and 3-8 years of related sales experience.
Revenue scope typically in the range of $5- 50M.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Service Leader-Coiled Tubing

Job Ref No.: PC11/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, supervises assigned staff for Coiled Tubing Product Service Line (PSL) within a Natural Work Area (NWA) (District). Supervises employees engaged in delivery of the PSL’s services and products.
Supervises multi-shift CT projects and technically demanding well intervention projects. Leads employees behavior and role based competency by mentoring and developing to achieve excellence in PSL Service Quality and HSE performance.
Assists the Field Service Quality Coordinator (FSQC) and Performance Development Coordinator (PDC) in Progressive Discipline for non-performing personnel. Completes performance evaluations of assigned staff under the direction of the FSQC/PDC. Champions Halliburton and Customer Health, Safety and Environmental (HSE).
Engages employees in Production Solutions and all other PSL initiatives in the field. Assists in implementation of new technology.
Evaluates service quality within assigned NWA with the goal of improving performance. Provides technical expertise and solutions to the customer.
Performs follow-up activities regarding job performance.
Skills are acquired by completing the Competencies required for this job role. Must possess exceptional skills within the service line and a general understanding of other service functions.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary. Promotes safety awareness and environmental consciousness.
Ensures compliance with Health, Safety, and Environmental (HSE) standards, practices and guidelines.
Must possess exceptional knowledge of Halliburton Management System (HMS) standards, work methods and processes.
Completion of an undergraduate degree required
With a minimum of 5 years of management experience.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Technical Professional – Reservior Evaluation

Job Ref No.: TFO7/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, provides supervisory/lead responsibility over a group of engineers.
Responsible for the technical standards and procedures of a group of engineers, drafters, and designers.
May conduct various aspects of performance management such as performance appraisal or counseling of employees with behavior or technical performance problems and assists in the interviewing, hiring, and assignment of new personnel in the discipline.
Administrative or supervisory responsibilities at this level include tactical responsibility for supervising engineers on all projects requiring this discipline.
Typical requirements include an undergraduate degree in Engineering and a minimum of 15 years industry specific experience, with average experience of 15+ years.
Certification as a Licensed/Chartered Professional Engineer is desirable.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Technical Professional-Completions, Senior

Job Ref No.: K949/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, provides Completion, Products & Services (CPS) job design, well support, and post job analysis to customers in designated area.
Develops and maintains personal relationships with the technical customer base.
Provides technical support on location as required by the customer or PSL Interprets well site data in real time using complex technologies such as software simulators and the latest electrical and mechanical equipment, calculations, and modeling.
Solve on the spot issues remotely and occasionally at the well site.
Assignments require sufficient professional experience to assure competence as a fully trained professional.
Must be able to work independently.
Functions as a communications link between customer, Business Development and Operations.
Develop and mentor Associate Technical Professionals and Technical Professionals. Undergraduate degree required – acceptable degrees are: all Engineering, Engineering Technology, Geology, Mathematics, Physics, & Chemistry with 3 years industry experience.
Certification as a Licensed/Chartered Professional Engineer is preferred.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Service Leader-Cementing

Job Ref No.: ZZ11/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, works with PDC and HR to hire operational staff.
Establishes development plans for the assigned operational team and ensures they are followed.
Performs applicable performance and competency assessments, and disciplinary activities as necessary up to and including termination proceedings with collaboration from the PDC and Human Resources.
Assists with pre-job preparations by reviewing the cement job plan with the Technical Professional and the cement crew and addressing equipment and / or operational concerns before mobilizing to location.
Supervises employees engaged in the delivery of cementing services and products, ensuring they follow the applicable Customer and Halliburton Health, Safety and Environmental (HSE) procedures and Halliburton Management System (HMS) procedures and the approved cement job plan.
If required, initiates the Management of Change procedure. Holds pre and post-job safety meetings. Reviews job performance with the crew to identify opportunities to improve.
Uses extensive cementing knowledge to assist cementing team resolve equipment and job execution problems. Engages employees in all PSL I Regional initiatives in the field.
With support functions, continually evaluates the service quality of delivered services, including reviewing applicable performance metrics such as equipment maintenance compliance and equipment readiness, and applies findings to improve HSE performance and the utilization of equipment and personnel, reduce costs, increase service efficiency and customer satisfaction.
Develops good customer relationships at the well site, providing operational expertise and solutions and following up on job performance to ensure customer satisfaction, including resolving job disputes and issues to approved levels.
Requires a high school diploma and 2 years of experience as a Service Supervisor or Service Specialist.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Service Supervisor III – Slickline

Job Ref No.: CL10/ESG/19
Location: Nigeria

Job Description/Requirements

Under general supervision, leads a crew in providing the complete range of slickline services in a geographic area under all operating conditions.
Consults with customers concerning products and services, promotes good customer relations at the well site, and insures customer satisfaction.
Reviews the job design and confirms that the job packet includes the proper equipment and processes to achieve the job purpose.
Confirms that unit, WPCE and downhole tools are ready, complete and correct for the job.
Performs all aspects of the job in compliance with HMS processes.
Applies technical knowledge to solve unanticipated situations, and consults with HES operations base as needed.
Performs onsite emergency unit/equipment maintenance as needed.
Demonstrates knowledge of pre and post-job product and service activities (employee’s ongoing participation in these pre and post-job processes will vary by location).
Properly maintains assigned equipment and ensures compliance with safety regulations and procedures.
Interacts with third parties whose activities could negatively impact slickline job execution process to assure proper coordination.
Mentors and assesses service operators and operator assistants in areas of expertise.
Recognizes possible sales opportunities for additional HES products and services and communicates them to appropriate HES personnel.
Promotes safety awareness and environmental consciousness, and complies with all applicable health, safety and environmental procedures and regulations.
Conducts and documents all Halliburton HSE related activities at the well site – site assessments and risk analyses, onsite safety meetings, PPE use, etc.
Completes all well site and post-job paperwork.
Participates in post job review with his/her supervisor.
Promotes and takes an active part in the quality improvement process.
Develops and demonstrates the ability to run new technology as it becomes available.
Assists with the review, validation and update of local HMS processes.
Completion of an undergraduate degree or its equivalent in Engineering preferred or combination of education and experience sufficient to successfully perform the essential functions of the job.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Account Manager

Job Ref No.: R436/ESG/19
Location: Nigeria

Job Description/Requirements

With general autonomy, leads a multi-PSL team that develops strategies and financial targets for a designated high profile client within a District, Country or Region with a revenue scope typically in the range of $100 – 200 M.
Recommends appropriate resources, personnel and pricing levels for business planning.
Develops strategies for maximizing the account’s profitability while creating. implementing, and managing an account plan in conjunction with the business plan.
Directs conflict resolution and facilitates contract negotiations.
Facilitates the development and implementation of technologies in both the client’s and ESG PSL organizations.
Serves as management interface and is responsible for Halliburton’s communication within the account organization as well as account communication within the Halliburton organization.
Responsible for developing relationships and positioning the PSLs at high level with the client.
Serves as a direct liaison with other Account Managers, BD Managers and with the Global Account Managers.
May lead a staff of account management personnel.
Skills typically acquired through completion of an undergraduate degree in Business administration, engineering, science, or similar disciplines and 5-8 years of experience in Product Service Line (PSL) field operations, Business Development, or Engineering
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Technical Services Advisor

Job Ref No.: S407/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, is recognized as subject matter expert and provides application expertise and any special technical data to Operations, Business Development, Application Engineering, Training and External Customers to support product and service applications globally.
Mentors to less experienced personnel.
Writes, revises, uses, and refers users to appropriate Technical Content of Product /Services.
Reviews content for accuracy and creates and approves revisions as needed.
Reviews responses and articles of less experience personnel.
Assist in design of and supervises the initial application (field tests) of new products or services or tests and evaluates operational software products/product releases from Software Technology resources.
Responsible for all formal communication for situations involving: Cautions and or warnings, design/product/service changes, Required Field Action, Interim procedures and reference information using a Technology Bulletin.
Responsible for the maintenance of Operational Manuals.
Reviews communication drafted by less experienced personnel.
Incorporates Reliability, HSE, and Quality standards Into job activities.
Job role directly impacts revenue center’s viability or its quality service via personal contributions.
Job role contributes directly to value creation.
Skills acquired through the completion of an associate degree in STEM discipline and 14 years of directly related work experience.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Field Professional-Geosteering, II

Job Ref No.: ST03/ESG/19
Location: Nigeria

Job Description/Requirements

Under general supervision, performs as a second-hand geosteering geologist by providing logging data analysis and geological interpretation resulting in modification of the well plan to make accurate and safe drilling recommendations to the customer for optimum placement of the well bore.
Communicates recommendations internally and to Operator personnel to ensure that the objectives of geosteering optimization projects are met. Ensures the pre-well data is properly collected, documented, and accurately loaded into the geosteering software.
Presents complete, detailed, accurate and professional reports to the customer as required, and maintains an updated standard well summary file during the well to assist in writing the end-of-well report.
Assists with pre-well modeling and creation of the decision matrix for the realtime geosteering operations.
Acts as a third-hand on more complicated and difficult geosteering projects by presenting interpretation results to be included in the final analysis by the geosteering team.
Supports real time communication tools used to provide visualizations of available interpreted geological data to the customer.
Requires an undergraduate degree in Geoscience, Petroleum Engineering or other STEM degree and a minimum of 2.5 years of relevant industry experience.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Field Professional-Directional Drilling, I

Job Ref No.: DV04/ESG/19
Location: Nigeria

Job Description/Requirements

Under general supervision, provides on-site supervision of the Directional Drilling (DD) process including projection of well path to predetermined target coordinate.
Serves in a subordinate role on any job. Understands principles of Bottom Hole assembly (BHA) selection and -aspects of DD performance and ensures that BHA’s are assembled as planned including correct make-up torque, doping and handling.
Proficient in the use of DD computer software and able to assist in provision of advice and analysis to the client representative at the well site.
This shall include all survey calculations and well path projections.
Proficient in updating well profile plots and providing client representative with accurate directional survey data.
Aware of client’s requirements with regards to surveying procedures. Assists in the completion of a daily DD report, BHA performance report for each BHA run, completion of all service tickets and relevant paperwork (well data spreadsheet, lesson learned/best practice, End of Job Customer Survey (EJCS) and Key Performance Indicator (KPl) forms).
Familiar with the DD aspects of the client’s approved drilling program.
Assists in the inspection of all DO company equipment delivered on the work site. Interfaces with the MWD engineer to ensure BHA compatibility, planned operating parameters are within specification and correct tool face references are applied.
Maintains records of all DO equipment at well site including dimensional data and condition.
Ensure that all equipment is laid out after use in accordance with company procedures and manifested for back load at the end of the job. Participates in performance improvement initiatives.
Bachelor’s degree in a STEM discipline is required with 2 or more years of field experience in Directional Drilling, L/MWD or SDL
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Technical Advisor – Completions

Job Ref No.: R415/ESG/19
Location: Nigeria

Job Description/Requirements

Responsible for planning, directing, and coordinating engineering efforts in the delivery of Tools & Testing and Tubing Conveyed Perforating products and services.
Provides engineering expertise to external customers.
Negotiates critical and controversial Issues with top-level engineers and officers of other organizations and companies.
Problems are characterized by their lack of scientific precedents and source material, or lack of success of prior research and analysis so that their solution would represent an advance of great importance.
Job role functions as a technical specialist who makes decisions and recommendations that are recognized as authoritative and have a far-reaching impact on extensive engineering and related activities of the company.
Skills typically acquired through completion of an undergraduate degree in Petroleum or Mechanical Engineering and 10-15 years of oil field service experience Including experience in business development and experience managing the work of others.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Service Coordinator

Job Ref No.: FF05/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, uses operational business knowledge to make tactical/operational decisions and coordinate the movement of equipment, materials, and personnel within a Natural Work Area (NWA) in day to day operations. Coordinates the day-to-day activities of individuals performing job/resource planning roles.
Validates job proposals and reviews requirements versus available resources. Assesses service delivery requirements for each job within assigned NWA. Coordinates the engagement and use of third party services and equipment within assigned NWA’s.
Utilizes technical and/or operational expertise to provide service delivery solutions for customers. Orders equipment specific to customer specifications! job requirements.
Communicates job specific details and information to appropriate service delivery and support staff. Creates Sales Orders pursuant to contracts and pricing agreements for both scheduled and call out jobs.
Communicates effectively with customers and service delivery staff to resolve service delivery issues and irregularities. Interfaces and works effectively with field operations pursuant to service quality, employee development, worksite safety, and process improvement processes and issues.
Job role has budgetary type of accountabilities or directly impacts a revenue center’s viability or its quality of service via personal contributions.
Job role contributes directly to value creation.
Requires a high school diploma and a minimum of 5 years of experience in Halliburton field operations
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Service Leader – Completion Tools

Job Ref No.: CC11/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, coordinates and oversees shop and field activities regarding Product Service Line (PSL) work with the goal of ensuring customer satisfaction through compliance with Health, Safety, Environment (HSE) and Halliburton Management System (HMS) guidelines and requirements.
Employees under the supervision of the Service Leader are Service Specialists, Service Operators, and Tool Technicians.
Observes employees in the field and maintenance shops for SQ/HSE adherence to policy and provides training as necessary for the continued enhancement of skill levels.
Ensures the timely completion of training courses, including yearly HSE refresher-training, and maintenance of required levels of competency as required for the employees under their supervision.
Provides a supervisory presence on customer job sites as needed during various phases of complex, high-profile jobs.
Aids the service coordinator(s) in managing day-to-day operations as needed.
Participates in the investigation of unsatisfactory and/or unplanned job results.
A minimum of 5 years of experience as Service Specialist s required.
Completion of an undergraduate degree or its equivalent in Engineering preferred or combination of education and experience sufficient to successfully perform the essential functions of the job.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Country/Area PSL Service Manager

Job Ref No.: R454/ESG/19
Location: Nigeria

Job Description/Requirements

With general autonomy, promotes service excellence and customer satisfaction by providing training and guidance to individuals engaged in well site service work for an assigned PSL in a designated country/area.
Promotes and encourages safety and service quality. Responsible for profit/loss/ROl and corrective actions. Champions the implementation of new technology within Product Service Line (PSL).
Coordinates and assists with the Correction, Prevention, and Improvement (CPI) process for PSL. Investigates and performs follow-up activities on unplanned events and/or jobs, Investigates accidents, injuries and incidents within assigned PSL.
Handles the employee life cycle process (including hiring/firing, employee development, evaluation, promotion/demotions) for assigned PSL in conjunction with Human Resources. Manages and coaches Service Leaders, Performance Development Coordinators (PDC) and Field Service Quality Coordinators (FSQC) to effectively develop and evaluate employees in field operations.
Requires completion of an undergraduate degree in Production and Operations Management, Engineering, or similar disciplines and a minimum of 6 years of experience in Halliburton Product Service Line (PSL) field operations.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Project Manager – Pipeline & Process Services, Principal

Job Ref No.: PP23/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, this position manages the execution and delivery of large and/or complex project(s), Including day to day contact and communication with the client at a senior level.
Is responsible for the financial and technical success of the project (s).
Serves as the Focal Point within Halliburton; to the client and any 3rd Parties involved in the project(s).
Controls resources assigned to the project(s), as dictated by the terms & conditions of the contract.
Responsible for ensuring the delivery of quality customer service; personnel, property and environmental safety.
Plans, organizes, coordinates, and controls domestic and international projects in accordance with the established policies, procedures, systems, and requirements approved by the company.
Resolves disputes and problems of one or more projects.
Collaborates with Halliburton Product lines and Third Party Service providers to develop and implement project plans and strategies.
Recognizes and exploits the talents of personnel assigned to projects and demonstrates commitment to developing their skills, competencies and application of expertise.
Possesses a strong working knowledge of specific PPS service lines and client / operator operational practices.
The job role has budgetary accountabilities and directly impacts the profitability and reputation of the organization.
Supervises engineering support and tech professionals.
Supervises project personnel through subordinate leaders.
Develops business management skills and may serve as a proposal manager.
Typically requires 10 plus years as a PPS Technical Professional / Technical Advisor, or 15 years in PPS operations and projects.
Completion of an undergraduate degree or its equivalent in Engineering preferred or combination of education and experience sufficient to successfully perform the essential functions of the job.

Job Title: Service Supervisor II-Slickline

Job Ref No.: CL09/ESG/19
Location: Nigeria

Job Description/Requirements

Under general supervision, leads a crew in providing a wide range of slickline services in a geographic area. Consults with customers concerning products and services, promotes good customer relations at the well site, and insures customer satisfaction.
Reviews the job design and confirms that the job packet includes the proper equipment and processes to achieve the job purpose.
Confirms that unit, WPCE and downhole tools are ready, complete and correct for the job. Performs all aspects of the job in compliance with HMS processes.
Applies technical knowledge to solve unanticipated situations, and consults with HES operations base as needed. Performs onsite emergency unit/equipment maintenance as needed.
Demonstrates knowledge of pre and post-job product and service activities (employee’s ongoing participation in these pre and post-job processes will vary by location).
Properly maintains assigned equipment and ensures compliance with safety regulations and procedures.
Interacts with third parties whose activities could negatively impact slickline job execution process to assure proper coordination.
Trains service operators and operator assistants in areas of expertise.
Recognizes possible sales opportunities for additional HES products and services and communicates them to appropriate HES personnel.
Promotes safety awareness and environmental consciousness, and complies with all applicable health, safety and environmental procedures and regulations.
Conducts and documents all Halliburton HSE related activities at the well site – site assessments and risk analyses, onsite safety meetings, PPE use, etc. Completes all well site and post-job paperwork.
Participates in post-job review with his/her supervisor.
Promotes and takes an active part in the quality improvement process.
Develops his/her knowledge and skills to be able to run the most complex, or complete range of, slickline services under the most challenging conditions.
Develops mentoring and competency assessor skills.

General Requirements

Completion of an undergraduate degree or its equivalent in Engineering preferred or combination of education and experience sufficient to successfully perform the essential functions of the job.
All candidates are expected to have practical knowledge in the field applied for with a minimum years’ of experience as stated above.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Principal, Technical Professional-Cementing

Job Ref No.: K940/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, working closely with Business Development, matches Halliburton’s technical, commercial and operational capabilities to customer needs through developing a clear understanding of customer’s business and technical issues and drivers, effective delivery of technical sales presentations, and developing and maintaining personal relationships to effectively sell tailored cement solutions.
Liaises with customers on technical issues, including performance review and process Improvements to better support the needs of the customer.
Prepares tender submissions and develops Performance Optimization Plans (POP) for each customer, including the deployment of new technology and processes.
Is responsible for selling, and ensuring the cementing team also sells, the new technology and processes identified in the POP plans to maximize profitability and/or market share.
In accordance with Halliburton’s Management System and the Cementing strategy, provides cementing job designs for complex Isolation problems, operational expertise, and post job analysis to customers in designated area.
Ensures improvements identified from previous jobs are implemented and learning shared with the cementing team and advertises successes by writing, publishing and presenting case histories and industry papers (for example SPE).
Collaborating with customer office based drilling and/or production engineers, tailors barrier solutions to meet their requirements and Halliburton’s commercial expectations, considering both the price of the solution to the customer, including consideration for solutions and pricing offered by competitors, as well as the total cost to Halliburton to deliver it.
Performs technical investigations of irregular jobs and initiates, reviews, and closes CPls (Correction, Prevention, Improvement) pertaining to job design and technology.
Assists PSL managers, using available performance metrics, to identify ways to improve materials, equipment and personnel utilization, reduce costs and increase service efficiency.
Recruits technical staff.
Establishes development plans for the cementing technical team.
Mentors junior members of the cementing team, ensuring they follow their development plans.
Communicates and manages the implementation of applicable PSL / Regional initiatives.
Performs applicable performance and competency assessments and disciplinary activities as necessary up to and including termination proceedings with collaboration from Human Resources.
With minimal supervision, independently applies advanced engineering techniques, makes decisions on engineering problems and methods, and represents the organization to resolve important questions or to negotiate with key engineers and officials of other organizations.
At this level, individuals will have demonstrated creativity, foresight,and mature engineering judgment in anticipating and solving engineering problems in the most efficient and economical manner.
They will be expected to contribute to inventions, patents, and new designs or techniques which lead to improved services to our customers.
Must be able to work independently.
Completion of an undergraduate degree in a Science, Technology, Engineering or Math discipline required.
Requires 4 years experience in cementing and requires completion of the required cementing competencies.

Job Title: Account Leader, Senior

Job Ref No.: R501/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, optimizes account potential by directing activity of the account team.
Maximizes and sustains profitability of the client and market penetration/share by matching the total array of the company’s technical, commercial and operational capabilities to the client’s needs.
Develops working relationships with client’s management.
Identifies and accesses resources required to serve client’s domestic and international current and future needs.
Is an integral member of the BD team.
The Account Leader will work closely with District/Country/Area Sales Manager and Account Manager in developing a comprehensive business and/or Account Plan.
Skills typically acquired through completion of an undergraduate degree in Business Administration, Marketing, Engineering, or similar disciplines and 8 – 12 years of related sales experience.
Revenue scope typically in the range of $75 -150 M.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Manager, Country/Area Reliability

Job Ref No.: R490/ESG/19
Location: Nigeria

Job Description/Requirements

With general autonomy, responsible for driving culture of Right People (competency and development), Right Process and Right Equipment in operations.
Accountable for participating in and for planning Self audits in all the locations within the area of responsibility.
Responsible for review and reporting of all Service Quality (SQ) matters within a given area or country.
Assists Country/Area Manager with planning and execution of new startups in country/area of responsibility.
Reviews and audits data accuracy in online systems to include but not limited to CPI and SUMMIT/ORION.
Completion of an undergraduate degree in any engineering discipline.
Minimum of 7 years of experience in Halliburton Product Service Line (PSL) field operations which includes experience in the energy services industry and management experience. Good interpersonal and problem solving skills are required to ensure efficient field operations.
Job role requires subject matter expertise in the field operations of the PSL in which work is performed and the ability to understand PSL operations at the area level.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Field Professional, General-Logging & Perforation

Job Ref No.: L030/ESG/19
Location: Nigeria

Job Description/Requirements

Under general supervision, applies knowledge of Halliburton’s Open Hole Wireline technologies to independently provide all wireline services and tool operation to customers at the well site.
Responsible for most complex drilling scenarios, highly visible clients and special projects with high complexity.
Applies engineering, mechanical and geological principles to articulate complex data interpretations to clients from proprietary software and coaches clients fully through expected outcomes of various drilling scenarios independently.
Integrates understanding of Halliburton business, operational procedure and serves as a liaison in collaborations with other service lines to provide guidance to customers.
Provides guidance to junior wireline field professionals on delivering less complex services and tool operations to customers.
Completion of an undergraduate degree in Engineering, Science or other technical discipline is preferred or equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
Minimum of 3.5 years of experience in Open Hole Wireline field operations required.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Business Segment Manager

Job Ref No.: K143/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, leads operations within a specified segment of the Company for the purpose of ensuring the delivery of quality customer service, world-class safety, and business segment growth that maximizes shareholder value.
Maintains customer contacts for the purpose of assessing local needs and service quality.
Serves as a liaison for Halliburton Energy Services Business Development.
Collaborates with Halliburton Energy Services Business Development and Technology managers to develop and implement local product and service pricing strategies and technology initiatives.
Job role directly effects the profitability and reputation of the organization.
Skills are typically acquired through the completion of an undergraduate degree in a related Engineering discipline and a minimum 8 years of progressive experience in the energy services industry.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Service Specialist III – TCP

Job Ref No.: TPO7/ESG/19
Location: Nigeria

Job Description/Requirements

Under general supervision, routinely works in more than one type of well site and base camp as assigned by Service Coordinator.
Coordinates and oversees Tubing Conveyed Perforating (TCP) PSL functions at the well site and base camp.
Provides the planning necessary for the job including equipment setup, well site direction, and customer-related support activities.
Responsible for the activities relative to maintaining, setting up, testing, and operating equipment at the customer location and field camp.
Promotes and takes an active part in the Quality Improvement Process.
Ensures compliance with HSE regulations and guidelines.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
May help train service operators in areas of expertise. May monitor instruments and perform necessary calculations to assure quality of data/job.
Consults with customers concerning services and products, promotes good customer relations at the well site, and assures customer satisfaction with results.
Properly maintains assigned equipment and monitors compliance with safety regulations and procedures.
Confers with Service Coordinator On major decisions.
Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.
Consequences of error are easily measured and can be confined.
Skills are typically acquired through 5 years of experience as an operator.
Must meet the minimum competencies for Operator Assistant II, Service Operator I, and Service Specialist land II.
Completion of an undergraduate degree or its equivalent in Engineering preferred or combination of education and experience sufficient to successfully perform the essential functions of the job.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Principal Technical Professional – Completions

Job Ref No.: K948/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, provides Completion, Products & Services (CPS) job design, well support, and post job analysis to customers in designated area.
Provides technical and operational expertise to external customer in a professional manner.
Develops and maintains personal relationships with the technical customer base.
Assignments require sufficient professional experience to assure competence as a fully trained professional.
Must be able to work independently.
With minimal supervision, independently applies advanced engineering techniques, makes decisions on engineering problems and methods, and represents the organization in conferences to resolve important questions or to negotiate with key engineers and officials of other organizations.
At this level, individuals will have demonstrated creativity, foresight, and mature engineering judgment in anticipating and solving engineering problems in the most efficient and economical manner.
Requires the use of advanced techniques and modification and extension of theories, precepts, and practices of the field and related disciplines.
Provides technical guidance to drafters/designers, engineers, and is consulted extensively by associates and others with a high degree of reliance placed on scientific interpretations and advice.
Will have contributed inventions, patents, and new designs or techniques which are regarded as major advances, or which significantly reduce professional services hours on projects.
Undergraduate degree required – acceptable degrees are: all Engineering, Engineering Technology, Geology, Mathematics, Physics, & Chemistry and a minimum of 4 years industry experience.
Certification as a Licensed/Chartered Professional Engineer is preferred.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Country/Area – PSL Operations Manager

Job Ref No.: R453/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, leads operations for a country/area’s Product Service Line (PSL) for the purpose of ensuring the delivery of quality customer service, world-class safety, and PSL growth that maximizes shareholder value.
Develops annual business plan and ongoing forecasts of business performance for the country/area.
Responsible for profit/loss/ROl and corrective actions.
Develops and maintains customer contacts for the purpose of assessing local needs and service quality.
Serves as a liaison for Halliburton Energy Services Business Development.
Collaborates with Halliburton Energy Services Business Development and Technology managers to develop and implement local product and service pricing strategies and technology initiatives.
Responsible for development of future business leaders and succession planning within applicable PSI.
Job role directly affects the profitability and reputation of the organization.
Skills are typically acquired through the completion of an undergraduate degree in a related Engineering discipline (discipline may vary by PSL) and a minimum 10 years of progressive experience in the energy services industry including experience managing the work and activities of others.
Job level may be responsible for more than a single PSL or multiple smaller PSLs within a country/area.

Job Title: Country/Area PSL Operation Manager, Senior

Job Ref No.: R452/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, leads operations for a country/Area’s Product Service Line (PSL) for the purpose of ensuring the delivery of quality customer service, world-class safety and PSL growth that maximizes shareholder value.
Develops annual business plan and ongoing forecasts of business performance for the country/Area.
Responsible for profit/loss/ROI and corrective actions.
Develop and maintains customer contacts for the purpose of assessing local needs and service quality.
Serves as a liaison for Halliburton Energy Services Business Development.
Collaborates with Halliburton Energy Services Business Development and Technology managers to develop and implement local product and service pricing strategies and technology initiatives.
Responsible for development of future business leaders and succession planning within applicable PSL.
Job role directly affects the profitability and reputation of the organization.
Skills are typically acquired through the completion of an undergraduate degree in a related Engineering discipline (discipline may vary by PSI) and a minimum 10 years of progressive experience in the energy services industry including experience managing the work and activities of others.
Job level may be responsible for more than a single large PSL or multiple PSLs in a country/Area or multiple countries.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Manager Senior, Operations Finance

Job Ref No.: OF21 /ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, provides leadership and directs finance and accounting functions for a large or more complex defined geographic or divisional business area.
Responsible for managing the recruitment, training, and development of finance personnel within the assigned area.
Provides financial reporting information, business analysis, and interpretation of trends and presents and communicates findings and recommendations, using diverse tools, to senior operations and finance management consistent with a large or complex field operations or division accounting environment.
Plans, directs, and coordinates business analysis, report preparation, and operating/financial performance measures.
Coordinates business processes and procedures to ensure consistency and accuracy of financial data and business information, Coordinates financial reporting and forecasting, budgeting, and annual plan preparation.
Maintains performance standards that ensure compliance with internal management reporting requirements and business practices and maintains strong Internal control environment.
Responsible for ensuring statutory reporting complies with accounting principles and government regulations.
Participates in balance sheet management of items such as inventory, accounts receivable, and property.
Applies technical financial skills typically acquired through completion of an accounting, finance, or business university degree and ten (10) years of progressive experience in Support Services which includes experience in finance, accounting, and management.
University degree required; professional certification or advanced degree preferred.
Familiarity with common office environment and key business systems including SAP, Hyperion, contract management applications, and similar applications.
Demonstrates advanced levels of proficiency with business, industry, and company acumen, as well as cultural awareness, performance management, and leadership skills gained through diverse experience and multiple roles within finance and accounting.
May require working understanding of roles attributed to Support Services supporting field operations including tax, statutory, and treasury concepts.
Primary member of the defined geographic or divisional business area management team.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Manager, Sales

Job Ref No.: R442/ESG/19
Location: Nigeria

Job Description/Requirements

Leads, directs, develops and aligns the resources of the sales organization to implement the unit’s business plan.
Recruits and deploys technical sales resources for the area.
Develops account plans with Account Leaders and technical advisors.
Communicates with Business Development Team regarding pricing, technology, new business relations, and customer and competitor activity.
Job role is responsible for measurable assets such as department budgets, equipment, and staff.
Skills typically acquired through completion of an undergraduate degree in Business Administration, engineering, science, or similar disciplines and 8-10 years of experience in Product Service Line (PSL) field operations, Business Development, or Engineering.
Revenue scope typically in the range of $25- 100M.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Account Manager, Senior

Job Ref No.: R437/ESG/19
Location: Nigeria

Job Description/Requirements

With general autonomy, leads a multi-PSI team that develops strategies and financial targets for a designated high profile client within a District, Country or Region with a revenue scope typically in the range of $150 – 300 M.
Recommends appropriate resources, personnel and pricing levels for business planning.
Develops strategies for maximizing the account’s profitability while creating, implementing, and managing an account plan in conjunction with the business plan.
Directs conflict resolution and facilitates contract negotiations.
Facilitates the development and implementation of new technologies in both the clients and ESG PSL organizations.
Serves as management interface and is responsible for Halliburton’s communication within the account organization as well as account communication within the Halliburton organization.
Responsible for developing relationships and positioning the PSLs at high level with the client.
Serves as a direct liaison with other Account Managers, BD Managers and with the Global Account Managers.
May lead a staff of account management personnel.
Skills typically acquired through completion of an undergraduate degree in Business Administration, Engineering, Science, or similar disciplines and minimum 8 – 12 years of experience in Product Service Line (PSL) field operations, Business Development, or Engineering.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Service Supervisor – Cementing

Job Ref No.: ZZ10/ESG/19
Location: Nigeria

Job Description/Requirements

Under general supervision, coordinates and oversees cementing service line work at the well site handling the more complex, hazardous, and/or high profile jobs while providing quality service to the customer.
Job role may include sales, job design, execution, and follow up activities.
Cross trains and active participates in one or more product service lines.
Provides the planning necessary for the job including instructions to the crew and equipment used, including dispute resolutions to approved levels.
Ensures customer satisfaction with work performed.
Coordinates and directs the activities of service operators.
Coordinates the clean up, repair, and preparation of equipment for the next job.
Plans and performs necessary calculations for the total job at the well site as needed.
Leads the site crew comprised of Halliburton and/or non-Halliburton employees.
Evaluates individual performance levels of the crew and trains operators to improve their job performance.
Job role has budgetary type of accountabilities or directly impacts a revenue center’s viability or its quality of service via personal contributions.
Skills are typically acquired through a High school diploma, or similar education and 2 years of experience as Service Supervisor- Cementing, II.
Licensure to drive commercial equipment may be required.
Given the nature of oil field service work, the ability to communicate effectively with others is necessary.
Promotes safety awareness and environmental consciousness, and complies with all applicable safety and environmental procedures and regulations.
Ensures compliance with Health, Safety, and Environmental (HSE) regulations and guidelines.
Promotes and takes an active part in the Quality Improvement Process.
Must meet the minimum developmental standards for this job classification.
Demonstrates proficiency in the operation and maintenance of each type of equipment/unit/tool normally used in the product service line.
Has exceptional skills within the service line and specific knowledge and understanding of other service functions.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Well Control Specialist – Response, V

Job Ref No.: BC405/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, provides on-site consulting and monitoring of oil well blowout and emergency conditions and assists in drilling operations, as well as, firefighting, well-killing and other blow out procedures in emergency drilling situations.
Confers with customer, as needed, to ensure that company interests are protected and that project completion goals are met.
Ensures that well-site activities are well managed, coordinated, and completed in accordance with Company policies, procedures, quality standards, and safety regulations.
Advises on specific servicing problems and recommends use of specialized tools, techniques, and services.
Assists in supervising repair and maintenance of equipment.
Mentors and develops others in proficiency levels 1-4.
Consistently communicating effectively verbally, in writing and by illustration.
Generates post job analysis report(s) including procedures that were successful and techniques that could be used to improve procedures that were not as successful as planned.
Job history of effectively evaluating project requirements and determining applicability of downhole tools,
Is able to demonstrate knowledge and operation of hydraulic equipment, operation, troubleshooting, repair or replacement of firefighting equipment.
Effectively evaluates project requirements and recommends appropriate fluid handling systems.
Implements special personnel safety provisions, regulatory requirements, obligations or deviations from normal operating procedures.
Champion’s safety and Halliburton Management System service quality leadership and team building.
Identifies, communicates and addresses barriers to achieving project objectives.
Consistently using good judgment to demonstrate leadership in adherence to HSE and HMS service quality policies and procedures.
Demonstrates knowledge, operation, troubleshooting, repair or replacement of jet cutter equipment and systems.
Supervises the delivery of appropriate B&C well control services for customers on complex projects.
Demonstrates understanding and application of Well Control, identifying cause and effect of well control events, and analyzing and managing risks.
Consistently executes, manages and designs solutions for customers.
Ensures that appropriate work agreements are executed with customers.
Is able to perform surface interventions.
Is able to demonstrate appropriate and successful well control procedures.
Capable of troubleshooting, repairing and replacing wellheads and wellbore components.
Supervises extraordinary well control situations (i.e.: shallow gas, gas flow after cementing, lost circulation, off bottom kicks, underground blowouts, etc.).
Completion of an undergraduate degree in engineering preferred or an equivalent combination of education and experience sufficient to successfully perform the essential functions of the job.
Minimum of 15 years of experience in well site operations.
Must work under hazardous conditions including high pressure, high temperature, loud noise, fire, chemical and gas exposures, moving machinery, etc.
Must be able to maintain professional relationships with customers.
Well organized with strong planning and project management skills required.
Attention to detail, quality orientation required.
Must be able to organize multiple projects.
Excellent communication skills.
Strong problem solving abilities.
Strong PC computing skills, including MS Office and engineering software.
Good communication and effective working relationships exist with other departments.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Senior-Consulting Manager

Job Ref No.: LG131/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, has good knowledge and understanding of applicable science and technology and the oil and gas industry, gained through formal education and work experience.
Demonstrates expert knowledge in at least one technical area, business domain or within project management.
Communicates to individual clients how they should use technology and improve work processes to be more productive.
Understands, can articulate and create or modify mainstay process for assignment delivery.
Has the ability to lead practices (or large teams) and can be a direct point of contact for clients.
Effectively plans and manages work of assigned teams to meet desired service level targets.
Maintains a consistent client-focused approach with clients and/or individuals.
Actively engaged in business development activities, frequently support sales teams for both services and software, and looks for new areas for revenue growth.
Maintains a consistent client-focused approach with clients and/or individuals.
Drives the development and execution of the practice strategy, service delivery oversight, and career development for the practice.
Known within the industry at large for one or more areas of expertise.
Skills are typically acquired through completion of an undergraduate degree in Geo-science, Engineering, Computer Science or Business and 17 or more years of experience.

Job Title: Principal Technical Professional – Log Analysis

Job Ref No.: K665/ESG/19
Location: Nigeria

Job Description/Requirements

Identifies and develops markets for new or existing well log products (Well Analysis Products) and services.
Responsible for analyzing well logs and making recommendations to customers for well completion or new well sites.
Devises new approaches to problems encountered.
Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria.
Maintains an awareness of new technologies.
Responsible for monitoring the quality of tool and log response based upon hole conditions, geology, and reservoir fluid properties within a NWA/Country.
Typical requirements include an undergraduate degree in Engineering and a minimum of 7 years’ experience, with a minimum of 4 years’ experience as a Technical Professional in Logging and Perforating.
Certification as a Licensed/Chartered Professional Engineer is preferred.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Technical Advisor – Directional Drilling

Job Ref No.: K059/ESG/19
Location: Nigeria

Job Description/Requirements

This position functions as a technical specialist within the assigned discipline and sub-PSL.
Possesses in-depth knowledge of product or service specifications and applications, including operation and maintenance.
Monitors and reports on local product/service performance in terms of MTBF and cost.
Coordinates local CPI process including product/service failure investigation and reporting to customer.
Serves as liaison between Delivery and Technology, providing input to new product design, service, and application requirements.
Working with Technology, coordinates, monitors, and reports on field testing of new products/services.
May serve as local commercialization coordinator for introduction of new products/services into local market.
As required, participates in customer presentations covering area of expertise.
Provides well-site support to Company and customer personnel, including equipment trouble-shooting.
Offers advice on equipment capabilities and advises field personnel on technical complexity and operation.
Typical requirements include an undergraduate degree in Engineering or equivalent operations experience.
Typical incumbents have a minimum of 4 years experience with an average experience of 7-10 years.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Service Specialist III – Well Dynamics

Job Ref No.: CW07/ESG/19
Location: Nigeria

Job Description/Requirements

Under general supervision, oversees the installation of the complete range of Smartwell and potentially HCT completion products under all operating conditions in the region.
Works closely with engineering, applications engineering and service coordinators to prepare, review or approve comprehensive deployment and testing procedures for execution.
Typically acts as job site lead and may supervise up to eight (8) employees while performing the same work.
Acts as Halliburton – WellDynamics representative on location and promotes good customer relations at the well site to ensure customer satisfaction.
Performs system integration and/or other tests required by engineering or the customer which require In-depth knowledge of system characteristics, operation and performance.
Assists in reviewing the job design and confirms that the job packet includes the proper equipment and processes to achieve the job purpose.
Applies technical knowledge and skills to facilitate or troubleshoot operations regarding software, electrical interfaces, communications or completion techniques to solve unanticipated situations.
Takes responsibility for commissioning/testing or specialized deployment of Smartwell completion equipment.
Chairs pre- and post-job equipment and service activities.
Oversees the maintenance of service equipment and ensures compliance with safety regulations and procedures.
Interacts with third parties whose activities could impact the installation process.
Mentors and assesses service operators and/or service specialists in all areas.
Conducts and documents all Halliburton HSE related activities at the well site including site assessments, risk analysis, safety huddles and meetings, selection and use of PPE, etc.
Oversees the completion of all well site and post-job paperwork.
Job role directly impacts quality of service through personal contributions.
Consequences of error are normally detectable and are often recoverable.
Promotes safety awareness and environmental consciousness, and complies with all applicable HSE procedures and regulations.
Promotes and takes an active part in the quality improvement process including assisting with the review, validation and revisions to local HMS processes.
Demonstrates superior customer service, negotiation and leadership skills.
Develops his/her knowledge and skills to be able to run the most complex of SmartWell and/or HCT product offerings in his/her geographic area under the most challenging conditions.
Develops and demonstrates ability to run new SmartWell technology as it becomes available.
Completion of an undergraduate degree or its equivalent in Engineering preferred or combination of education and experience sufficient to successfully perform the essential functions of the job.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Technical Advisor II – GBA

Job Ref No.: TU17/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction is responsible for planning, directing, and coordinating engineering efforts in drilling operations on location.
This position functions as a technical specialist who makes decisions and recommendations that are recognized as authoritative and have a far-reaching impact on extensive engineering and related activities of the company.
Understands drilling metrics and drilling technology.
Assures that drilling operations are cost effective and consistent with overall strategy.
Has expert knowledge of drilling optimization.
Negotiates critical and controversial issues with mid to upper level engineers and officers of other organizations and companies.
Encounters problems characterized by their lack of scientific precedents and source material, or lack of success of prior research and analysis so that their solution would represent an advance of great significance and importance.
Performs advisory and consulting work for the organization as a recognized authority for broad program areas or in an intensely specialized area of considerable novelty and importance.
At this level, the individual generally will have contributed inventions, new designs, or techniques, which are of material significance in the solution of important problems.
Typical requirements include an undergraduate degree in Engineering and a minimum of 10 years’ experience, with average experience of 15+ years.
Incumbents at this level will usually hold a certification as a Licensed/Chartered Professional Engineer, with 5 years Under-balanced drilling experience.
Possession of a Well Control Certificate required.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Senior Technical Professional Manager

Job Ref No.: MTP/ESG/19
Location: Nigeria

Job Description/Requirements

This is a management level position with full responsibility for hiring decisions, staffing levels, budgets, salary administration, and career development of assigned personnel within an engineering discipline.
Managerial responsibilities include establishing and maintaining the technical standards within the discipline.
Responsible for setting strategic and tactical direction with regard to policy/procedures, work force staffing, and budgeting.
Employees in this position participate in decisions regarding the acquisition and execution of contracts.
May supervise several subordinate supervisors or team leaders.
Typical requirements include an undergraduate degree in Engineering and a minimum of 10 years’ experience, with average experience of 15+ years.
Certification as a Licensed/Chartered Professional Engineer is desirable.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Field Service Manager – Wireline and Perforation

Job Ref No.: LP12/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, the Wireline Field Service Manager supervises multiple Wireline and Perforating crews, who on a daily basis execute services at the well site. This includes hiring members of the crews, disciplining and terminating crew members.
Provides input into the development of personnel and uses competency data to improve job performance metrics.
With past field experience, serves as an assessor to assess crew competence.
Regularly uses performance data to identify opportunities for performance improvements.
Knowledgeable of and actively promotes the application of Halliburton Management System (HMS) to work methods and processes.
Coordinates and assists with the Correction, Prevention, and Improvement (CPI) process for the PSL.
Investigates and performs follow-up activities on irregular/unplanned events and/or jobs.
Is accountable for compliance with Health, Safety and Environmental (HSE) Standards & actively promotes and uses Halliburton tools related to safe working conditions, such as Job Safety Analysis (JSA) & Hazard Observation Programs (HOC).
Involved in the process of investigating accidents, injuries, and incidents within assigned PSL using the appropriate investigative tools (Taproot).
Drives the implementation of new technology within Wireline and Perforating at client’s location.
Job role contributes directly to value creation and directly impacts a revenue center’s viability and its quality of service via personal contributions.
Requires completion of an undergraduate degree in Engineering, Business Administration or similar disciplines and a minimum of 3 years of experience in Wireline & Perforating field operations.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Technical Advisor – Cementing

Job Ref No.: ZZ20/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, working closely with Business Development, matches Halliburton’s technical, commercial and operational capabilities to customer needs through developing a clear understanding of customers business and technical issues and drivers, the effective delivery of technical sales presentations, and developing and maintaining personal relationships to effectively sell tailored cement solutions.
This position functions as a technical specialist, with expert knowledge of cementing operations and engineering.
Liaises with customers on technical issues, including performance review and process improvements to better support the needs of the customer.
Follows the Business Acquisition Process.
Prepares tender submissions and develops Performance Optimization Plans (POP) for each customer, including the deployment of new technology and processes.
Is responsible for selling, and ensuring the cementing team also sells, the new technology and processes identified in the POP plans to maximize profitability and/or market share.
In accordance with Halliburton’s Management System and the Cementing strategy, provides cementing job designs for complex isolation problems, operational expertise, and post job analysis to customers in designated area.
Ensures improvements identified from previous jobs are implemented and learning shared with the cementing team and advertises success by writing, publishing and presenting case histories and industry papers (for example SPE).
Collaborating with customer office based drilling and / or production engineers, tailors barrier solutions to meet their requirements and Halliburton’s commercial expectations, considering both the price of the solution to the customer, including consideration for solutions and pricing offered by competitors, as well as the total cost to Halliburton to deliver it.
Performs technical investigations of irregular jobs and initiates, reviews, and closes CPIs (Correction, Prevention, Improvement) pertaining to job design and technology.
Assists PSL managers, using available performance metrics, to identify ways to improve materials, equipment and personnel utilization, reduce costs and increase service efficiency.
Recruits technical staff.
Establishes development plans for the cementing technical team.
Mentors junior members of the cementing team, ensuring they follow their development plans.
Ensures Technical Team are following all applicable HMS processes.
Communicates and manages the implementation of applicable PSL/ Regional Initiatives.
Performs applicable performance and competency assessments, and disciplinary activities as necessary up to and including termination proceedings with collaboration from Human Resources.
With minimal supervision, Independently applies advanced engineering techniques, makes decisions on engineering problems and methods, and represents the organization to resolve important questions or to negotiate with key engineers and officials of other organizations.
At this level, individuals will have demonstrated creativity, foresight, and mature engineering judgment in anticipating and solving engineering problems in the most efficient and economical manner.
They will be expected to contribute to inventions, patents, and new designs or techniques which lead to improved services to our customers.
Must be able to work Independently.
Completion of an undergraduate degree in a Science, Technology, Engineering or Math discipline required.
Typically requires 10 years’ experience in cementing and requires completion of the required cementing competencies.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Technical Advisor – Response, Senior

Job Ref No.: BC411/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, supervises assigned staff and is also responsible for performing calculations and making assessments on well control problems both onsite and from the office.
Also, works on special international and domestic projects.
Assist with troubleshooting.
Maintains appropriate reports and documentation of well site activities.
Supports team members and ensures that deadlines are met.
Provides technical support on location as required by the customer or Product Service Line (PSL).
Assignments require sufficient professional experience to assure competence as a fully trained professional.
Must be able to work independently.
This is the lead position responsible for job execution and overall performance.
Responsible for company assets on location.
Assures that adequate supplies and equipment are present at well site at all times.
Offers advice on equipment capabilities.
Keeps management informed of significant problems.
Complies with safety regulations.
Completion of an undergraduate degree in Mechanical Engineering or Petroleum Engineering or related discipline required and a minimum of 15 years of experience in wellsite operations.
Understanding of Company operations and needs.
Strong knowledge of engineering concepts.
Strong understanding of RMS department’s processes and concepts.
Strong knowledge of engineering concepts.
Strong understanding of Response department’s processes and concepts.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Technical Advisor – Response, Senior

Job Ref No.: BC411/ESG/19
Location: Nigeria

Job Description/Requirements

Under broad direction, supervises assigned staff and is also responsible for performing calculations and making assessments on well control problems both onsite and from the office.
Also, works on special international and domestic projects.
Assist with troubleshooting.
Maintains appropriate reports and documentation of well site activities.
Supports team members and ensures that deadlines are met.
Provides technical support on location as required by the customer or Product Service Line (PSL).
Assignments require sufficient professional experience to assure competence as a fully trained professional.
Must be able to work independently.
This is the lead position responsible for job execution and overall performance.
Responsible for company assets on location.
Assures that adequate supplies and equipment are present at well site at all times.
Offers advice on equipment capabilities.
Keeps management informed of significant problems.
Complies with safety regulations.
Completion of an undergraduate degree in Mechanical Engineering or Petroleum Engineering or related discipline required and a minimum of 15 years of experience in wellsite operations.
Understanding of Company operations and needs.
Strong knowledge of engineering concepts.
Strong understanding of RMS department’s processes and concepts.
Strong knowledge of engineering concepts.
Strong understanding of Response department’s processes and concepts.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Title: Operations Leader – Directional Drilling (DD)

Job Ref No.: K5O1/ESG/19
Location: Nigeria

General Requirements

Completion of an undergraduate degree or its equivalent in Engineering preferred or combination of education and experience sufficient to successfully perform the essential functions of the job.
All candidates are expected to have practical knowledge in the field applied for with a minimum years’ of experience as stated above.
Experience in oil and gas deep-water operation will be an added advantage for applicants.

Job Description/Requirements

Provides job design, well-site technical support, and post job analysis to customers.
Functions as a communications link with the Solutions Team.
Develops and maintains a personal relationship with the technical customers in assigned area.
Integrates multiple Product Service Lines (PSLs) in job design.
Documents EVC practices to the Solutions Team.
Consults with PSLs regarding equipment needs and specifications.
Provides technical training as required.
Typical incumbents have a minimum of 7 years’ experience with an average experience of 10-15 years.

Deadline: 17th September, 2019.

How to Apply
Interested and qualified candidates are required to forward their CV and Application Letter clearly stating their position of interest to: WCEACorporatecommunication@Halliburton.com

Note

Your mail subject must indicate the “Job Title and the Reference Number” of the position you are applying for.
The position is for experienced personnel only. Only candidates with the required level of experience for the position applied for will be considered.

Fresh Jobs at Halliburton Energy Services Nigeria Limited, 3rd Sept., 2019

Comments

Leave a Reply Cancel reply

Leave a Reply