Employment Opportunities at Deep Blue Energy Services Limited (DBESL)

Deep Blue Energy Services Limited (DBESL) is a resource and solution management company that specializes in assisting international/Local companies in identifying Potential market opportunities, assisting with permits, sourcing highly skilled employees, bidding on and negotiating contracts and navigating the often complex political and policy environment of many sub-Saharan African countries.

We are recruiting to fill the position below:

Job Title: Principal SPM & Oil Offloading System Construction Engineer

Location: Lagos Island, Nigeria
Job Category: Oil & Gas
Job Type: Contract
Job Shift: Day
Duration: 4 weeks

Description

• Support Construction Management Team (CMT) Lead comprising of the activities of SPM Construction Engineer, Offshore Coordination Team (OCT) Engineer, Pipeline Construction/ Installation Engineers and Subsea Engineers for the seamless execution and delivery Project.
• Support Package Lead in the development and Implementation of Technical Bid evaluation (TBE) Template and actively participate in the review and selection process for the Technical Offers from the Bidders
• Support Package Lead in the development of Commercial Bid evaluation (CBE) Template and actively Participate in Selection process for the winning bidder
• Actively Participate in the development of Post Tender Negotiation (PTN) strategy and contribute to cost savings /avoidance initiatives and including support for preparation of the Contract document.
• Actively participate in Tender Assurance activities and ensure close out of all the identified actions (HAZOP, ITRs, PCAP assurance, MoCs, PMF deliverables and IPA benchmarking)
• Support package Lead in Identifying relevant interfaces and participate in all interface meetings, workshops and review sessions to ensure alignment of deliverables between relevant packages and disciplines.
• Support, review and approve the evaluation and selection of EPC sub-contractors and suppliers to execute parts of the required construction scope.
• Lead the Execution of EPC-5 scope entailing detailed Engineering, Procurement, Fabrication, Loadout, marine transport & Installation Engineering, Pre-lay & wet-packing of mooring systems and suction piles, Oil Offloading Risers (OOR’s), Post-installation & commissioning supports Transportation and Installation of SPM buoy, Suction Piles and Mooring Lines.
• Provide Construction Engineering expertise to the EPC-5 Project package covering all activities such as planning, contract development/Management and award, site and off-site construction management, commissioning related to the implementation and hand-over of the SPM and OOS system facility.
• Support the development of Construction execution philosophy and identify all the critical early project execution deliverables.
• Participate in constructability and safety reviews during detailed design of the SPM and OOS facilities during construction.
• Drive implementation of IOGP Construction Site Safety Standardisation (CSSS)at Contractors fabrication and construction sites.
• Promote development of in-country fabrication and construction capabilities.
• Provide support for the Resourcing, development and setup of the EPC-5 Construction site offices and Fabrication yards located in-country.

Qualifications

• A university degree in Marine, Mechanical or Civil/Structural Engineering discipline with 15 years’ experience in Project Engineering, of which at least 10 years’ experience directly related to delivery of SPMs and Offloading System scope in Deepwater Mega Project Construction Engineering Management with emphasis in design and Execute phase (detail   design, construction, installation, commissioning and start-up).
• The position will appeal to persons who have previously had overall responsibility for the fabrication and construction of large and complex oil and gas facilities for offshore applications and particularly in SPMs and oil offloading systems.
• Technical Professional with broad and deep knowledge of Deepwater SPMs and Offloading System systems design, fabrication, installation, pre-commissioning and commissioning and should have played a key role in the delivery of at least one major Deepwater project involving subsea infrastructure design and installation.
• Previous experience on in-country fabrication & construction experience of Deepwater buoys.

Preferred Skills:

• Able to work within and interface with mixed teams of professionals located globally.
• He/she shall meet the requirement of a COREN registered or registerable engineer.
• Strong working knowledge of a broad range of SPM and offloading facilities and project engineering systems, buoy and moorings industry design codes, standards, class rules, criteria, tools and practices.
• Excellent inter-personal and leadership skills, well developed communications skills (i.e. report writing and presentation) are essential.
• Ability to effectively functioning a multi-cultural and multi-discipline environment.
• Proven track record of having successfully delivered at least one major (>$500 million) E&P project.
• Broad knowledge of Deepwater Construction design, fabrication, installation, commissioning and operation with a fair amount of depth in at least one main system (subsea, pipeline, topsides, host, etc.).
• HSE commitment and leadership.
• Knowledge of key external stakeholders’ needs and business drivers, including economic, political, environmental, and social issues.
• Commercially astute and “streetwise”. Proven track record in commercial negotiations and contractor management.
• High personal energy level and a proven track record in achieving stretching personal and business goals
• Maintain composure under pressure while providing clear and decisive leadership.
• Strong interpersonal skills – able to influence and develop relationships across disciplines and culture, be comfortable coaching and motivating others, and delivering through others.
• Familiar with project development challenges in Nigeria or in other regions with similar challenges.

Requirements

• Gender: Does not matter
• Age: 25 Years – 55 Years
• Highest Education: Minimum Education University
• Degree title: A university degree in Marine, Mechanical or Civil/Structural Engineering discipline
• Experience: Minimum Experience 10 Years
• Other experience: 10 years’ experience directly related to delivery of SPMs and Offloading System
• Career Level: Experienced (Non-Manager)

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Principal Pipeline Offshore Installation Engineer

Location:Lagos Island, Nigeria
Job Category: Oil & Gas
Job Type: Contract
Job Shift: Day
Duration: 4 weeks

Job Description

• Bring consistency and uniformity into disciplines deliverables during technical bid clarifications with bidders to ensure a harmonious interface.
• Coordinate the response to technical queries in installation scope during tender clarifications. Track and record all technical queries and support C&P in providing response to tenderers.
• Act as a focal point/technical authority for pipeline installation engineering questions throughout detailed engineering design phase.
• Assists upper level management in detailed review and assessment of installation schedules as part of de-risking and readiness review for Contract award.
• Provide engineering inputs to alternative installation technique from the Tenderers.
• Review complete project documents for conformity and quality assurance in Bid Engineering phase.
• To review installation contractor plans and schedules to ensure alignment with project objectives, and to monitor contractor performance against plan
• She/he will provide technical support in preparation for pipeline construction / offshore operations /field installations, investigations and repair methods, as well as planning the following offshore Installation activities:
• Review Installation procedures and method statements for Flowline Termination Assemblies ‘FTA, In-line SLEDs, Wye-Piece for the entires PFRI scope.
• Review detailed procedure/specifiction for FPSO in-country towing from Integration yard.
• Review of Installation analysis of all subsea hardwares to validation methods and the tools including heavy offshore lifting plan for riser barrier installation.
• Review of transportation analysis of all subsea hardwares and critical components.
• Supervision of load-out, transportation and offshore installation campaigns for Umbilicals(static and dynamics) including subsea distribution systems(EDMs,UTAs, Flying Leads etc.
• Supervision of load-out plans, transportationand offshore installation campaigns of deepwater foundations such as suction piles.
• Supervision of load out plans manifolds.
• Review of design of Transportation & Installation Aids.
• Develop and coordinate analysis and operational procedures, processes, systems and documentation reviews.
• Actively involved in review of installation analysis for jumpers / spool pieces and anchor pattern analysis.
• Support material take off assessment as may be required necessary to support seamless execution of offshore field installation campaigns, including review of execution strategy.
• Liaise with Quality Assurance discipline to ensure alignment between the QA/QC requirements and the technical specifications. Verify contractors installation plan to ensure consistency with overall project plans whilst highlighting any possible deviations and remedial actions.

Qualifications

• A B.Sc in Engineering or Science Degree with a minimum of 15 years experience after graduation.
• Candidate is required to have a minimum of 12 years hand-on strong working experience of cumulative of in similar offshore installation.
• Candidate is expected to have performed significant offshore load-outs and installation of large subsea infrastructure. Supervised Offshore Pipeline installation including Riser pre-lay and recovery. In addition to offshore heavy lifts of large subsea manifold, suction piles, static and dynamic umbilicals/Flexible installations.
• Candidate must be conversant with use of S-Lay, J-Lay and flex lay techniques for offshore pipeline installation

Preferred Skills:

• Experience with analysis techniques for offshore pipeline construction;
• Experience of engineering effects of VIV strakes, stress joints etc, and other in-line components typical of deepwater pipeline systems. Engineering of PIP systems and insulations would be an advantage
• Understand of specific project requirements, material construction, specifications, design analysis, calculations and data sheets, man hour estimation for proposals, study reports, pipeline materials, welding techniques, technical bid evaluation and review of vendor documents
• Strong background and hands-on experience with one of the following: offshore pipeline design, offshore pipeline installation engineering, or offshore pipeline project engineering aspects of the design of onshore, offshore and deepwater oil production facilities. Knowledge of manufacturing processes, including fabrication, machining and various mechanical systems.
• Offshore offloading facility construction and installation experience
• Pipeline construction and repair methods experience
• Solid working knowledge of relevant oil and gas pipeline engineering international codes and standards   (DNV, API, BS, etc)
• Excellent communication skills;
• Very good command of verbal and written knowledge of the English language;
• Strong analytical, planning, organizational, and time management skill. Proficient computer skills, especially Microsoft Office applications.
• Proficient in Offpipe, Abacus, Orcaflex or Pipelay software
• Flexibility and willingness to work as part of a team; HSE commitment and leadership
• Coaching, mentoring, and motivating others to be successful
• Global mindset and perspective. Ability to lead work in teams of professionals in matrix organization and network located globally with others outside immediate location.
• Knowledge of interface needs/issues with Development Planning and subsurface groups.
• Skilled at leading through influence.
• Ability to deal with multiple, often conflicting, goals and priorities. High personal energy level and a proven track record in achieving stretching personal and business goals
• Proven team building and people management skills.
• Occasional trips offshore, willingness to work abroad and onboard our Pipelay Barge may be required.

Requirements:

• Gender: Does not matter
• Age: 25 Years 55 Years
• Highest Education: Minimum Education University
• Degree Title: A BSc in Engineering or Science degree
• Experience: Minimum Experience 15 Year
• Other experience:  a minimum of 12 years hand-on strong working experience of cumulative similar offshore installation
• Career Level:  Experienced (Non-Manager)
• Job Status: Sourcing

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Principal Subsea Intervention & Construction Engineer / Technical Authority (TA2)

Location: Lagos Island, Nigeria
Job Category: Oil & Gas
Job Type: Contract
Job Shift: Day
Duration: 4 weeks

Job Description

• This is a safety critical TA2 position where substantial past experience managing HSSE at the design and operational stages is mandatory. This position is responsible for ensuring that HSSE considerations are implemented into all work deliverables. This is essential to ensuring the safe and efficient work of those personnel who will be executing the tasks offshore.
• Per DCAF; TA2 provides (integrated) quality assurance for the Discipline decisions and deliverables with a significant multi-disciplinary content.
• Per other TA2 requirements; approves decisions and deliverables that are largely of single-discipline content.
• This is a 24/7 operational role, where daily technical and operational support is provided to the rig (completions/interventions), Field Support vessel (subsea intervention and installation activities), Asset (subsea IMR and flow assurance requirements).
• This role requires that the engineer be available at all times throughout the week even during the hours of the night/morning and holidays to review change requests, prepare procedures, troubleshoot issues, review lift plans and perform risk assessments. This role is not suited for an engineer who cannot make themselves available to produce technical work at any time throughout the day, 7 days a week.
• Role requires that the engineer must have sufficient technical and offshore experience related to subsea rig based and rigless intervention activities (CT, Wireline, Acid stim, suspensions, SILS equipment etc).
• Provides TA2 technical support to Wells Teams to support development of Rig completion and intervention procedures (CT, Wireline, Acid stim, plugs, Rigless SILS etc). This includes making technical input into the Well programs and ensuring that barrier philosophies are adhered to and intervention tasks are sequenced in such a way to ensure the safety of those executing the tasks.
• Develops procedures and allocate resources to facilitate well and subsea systems interventions. This is a critical position to coordinate the necessary resources and execute deep water emergency intervention. Engineer will provide technical approvals and assurance as a subsea TA-2 for all required decisions in subsea hardware, systems and intervention.
• Driver for offshore hook-up & maintenance activities and ensuring that they are executed in the most cost-effective manner in line with the business plan and in compliance with global company standards and contractual specifications.
• Has excellent knowledge of hardware & pressure control global standards/company standards and is required to ensure requirements are adhered to accordingly.
• Proficient in all aspects of subsea installation engineering, with a strong background/experience in lifting and hoisting calculations.
• Proficient in stress analysis design; will be required to review/approve and provide technical input into complex calculations and analysis.
• Responsible for providing technical, logistical, procedural, change request support to the field support vessel and Rig at all times. This involves being in constant communication with the vessel CSRs & Rig DSVs to ensure that tasks are being completed safely, as per procedure and within the allotted timeframe. Must be familiar with ROVs and ROV operations.
• Involved in design, construction, testing, installation, and start-up activities for existing and new projects.
• Provides, cost effective and efficient engineering support to inspection, maintenance and repair (IMR) for all Departmental subsea producing assets, and provides open water support for all subsea development ventures.
• Identify, schedule and execute all underwater Inspection, Maintenance and Repair (IMR) activities in line with the Maintenance Reference Plans ensuring that all executions plans are integrated with other Asset and/or project activities.
• Provide up-dates to the subsea system as-builts and documentation, consistent with procedures developed by the company organization.
• Required at times to take up role as Company Site Representative offshore on field support vessel or Rig as focal point to closely interface with Contractor Representative to ensure offshore campaign is delivered safely, within budget and with schedule.
• Back up offshore Subsea Engineer for both the Rig and FSV – must have experience in these offshore roles.
• Support management of HSE on the vessel/Rig, achievement of zero HSSE incidents. HSE Compliance as per HSE Plan, safety rules, policies and procedures.

Qualifications

• Certification of Technical Authority (TA-2 Level) in Subsea Systems & Intervention Engineering
• Level 5Certification IWCF (Well Intervention Pressure Control Certification)
• Pressure Control Systems / Subsea Systems Engineering / Subsea hardware Engineering / Subsea Intervention Engineering / Subsea Controls Engineering / BNW & BM Operational Experience / Rig operational experience / FSV operational experience / Operational HSE experience
• Education: B.Eng in Mechanical Engineering / Structural Engineering
• Ability to work offshore as required.

Requirements:

• Gender: Does not matter
• Age: 25 Years-55 Years
• Highest Education: Minimum Education University
• Degree title: BENG Mechanical Engineering/ Structural Engineering
• Experience: Minimum of 10 years experience.
• Other experience: 10 – 15 years experience in Major Oil & Gas Projects
• Career Level: Experienced (Non-Manager)
• Job Status: Sourcing

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Principal Subsea Equipment Engineer

Location: Lagos Island, Nigeria
Job Category: Oil & Gas
Job Type: Contract
Job Shift: Day
Duration: 4 weeks

Job Description

• Role requires extensive knowledge of running and troubleshooting both BH and FMC subsea equipment. This is predominantly a Company site representative role on the offshore drilling rig. Company Site Representative will be the focal point to closely interface with Contractor Representatives to ensure offshore campaign is delivered safely, within budget and within schedule.
• Must have extensive technical and offshore experience in running subsea completions equipment and all ancillary equipment.
• Shall be responsible for the implementation of the work procedure on the rig and intervention vessels, ensuring operating integrity and standards.
• Shall manage contractors onsite to ensure all work procedures are adhered to and all operations are executed safely and efficiently.
• Shall respond to any emergencies that may occur during offshore operation in accordance with the established procedures.
• Shall ensure   incidents, near misses UA/UC are reported and effectively manage the contractor’s crew safety performance on site.
• Must have extensive technical and offshore experience related to subsea rig based and rigless intervention activities (CT, wireline, acid stim, suspensions, SILS equipment etc).
• Shall ensure accurate recording of Daily Site Report based on actual times for work done, tools
• and equipment used, non-productive times, vessel, equipment status and personnel on board.
• Support supervision of equipment readiness and load out at the BH and FMC base.
• Highlight risk associated with the critical offshore facilities interfaces (primarily the rig) and the subsea equipment and develop mitigation plans accordingly.
• Provide technical clarifications to any comments raised with regards to the maintenance and operation of the subsea equipment primarily IWOCS and completions tooling.
• Support the Base Coordinator and Contract Holder in liaising with vendor for close out of any pending technical issues to be resolved during offshore execution in order to ensure that package is technically compliant and fit for purpose.
• Carry out specific job tasks and responsibilities as required on the rig and at the BHGE and FMC facilities.
• Provide technical expertise in case of subsea package/equipment upgrades or repairs as required.
• Ensure that   any modifications to the subsea equipment follow the technical change management system
• Participate in or lead incident investigations, for incidents relating to the use of the subsea equipment
• Support the DSV (offshore) and Base Coordinator (Onshore) in documenting all execution issues at site/ Lesson Learnt to be included in Close-Out Report or AARs to prevent reoccurrence in future.
• Supervise Subsea Contractor at the offshore site and ensure proper inventory of tooling is maintained and implementation of PSMs.
• Responsible for quality control of work execution offshore. And be the first line contact for contractor representative on the rig.

Qualifications

• A Bachelor’s Degree in Engineering
• Minimum of 10-15 years experience in Major Oil and Gas projects.

Requirements:

• Gender: Does not matter
• Age: 25 Years 55 Years
• Highest Education: Minimum Education University
• Degree title: A Bachelors Degree in Engineering
• Experience: Minimum Experience 10 Year
• Other experience: 10 – 15 years experience in Major Oil & Gas Projects
• Career Level: Experienced (Non-Manager)
• Job Status: Sourcing

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Material Controller

Location: Nigeria

Roles and Responsibilities

• He shall be responsible for inspection, maintenance and controlling of material records and supervise the material control department (MCD) in accordance with applicable policies and instructions.
• He shall perform a complete technical receipt inspection, conformity, verification and validation of controlled material in accordance with the applicable specifications and standards specified in the purchasing documents.
• He shall prepare and maintain all relevant documentation in accordance with applicable process Instructions using applicable forms/templates.
• He shall ensure all controlled materials issued to a specific job Includes the required documents including traceable Objective Quality Evidence (OQE) to support final Technical Work Document (TWD) certification and closeout.
• He shall coordinate the resolution of all material deficiencies and non-conformities discovered during the receiving, storage and shipment processes. Implement, evaluate and analyze the effectiveness of corrective actions resulting from audits and surveillance.
• He shall follow proper procedures to receive, warehouse, control and
• Distribute the materials.

Qualification and Experience

• Minimum of a technical degree.
• Minimum of 6 years hands-on experience in this role
• Must have a strong command of Microsoft Office Professional suite software.
• Planning and organizational skills,
• ICT Literacy
• Effective communication and negotiation skills.

How to Apply
Interested and qualified candidates should send their CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.

Job Title: Subsea Technical Support Engineer

Location: Nigeria

Roles and Responsibilities

• He shall lead arid direct in providing valuable Subsea and Pipelines Systems Integrity input and assist in driving the vision, strategy and the timely and effective implementation of the Subsea & Pipeline Integrity Management Programs (PIMS) and Emergency Pipeline Repair System (EPRS) for all Client pipelines.
• He shall be responsible for the preparation of the various scopes of work for the upcoming intervention programs, and the preparation of the free issue equipment that is needed for the intervention works.
• He shall provide the main interface between the diving or ROV contractor and Premier Oil when developing the detailed procedures, equipment lists, deck plans and any other relevant requirements.
• He shall perform the role of Client Worksite Representative offshore when necessary ensuring that the intervention contractor is provided with the correct site information and that the site is safe to use by identifying known hazards and ensuring appropriate barriers & isolations are put in place for interventions. He shall provide technical input to any development projects, supplying functional guidance to engineering contractors on discipline specific matters to ensure that work of a quality to meet the Client’s standards is produced in a timely and cost effective manner.
• He shall provide technical input to any decommissioning projects

Qualification and Experience

• Minimum of Bachelor’s degree in Mechanical, Metallurgy, Structural or Pipeline Engineering.
• 10 years’ experience in Oil and Gas sector with a focus on Pipelines Operations, Integrity inspection, Corrosion and Maintenance and/or Design & Construction. Knowledge of pipeline corrosion, failure mechanisms and corrosion controls and a proven record of accomplishment in a subsea & pipelines integrity focused organization.
• Experience and knowledge of risk based integrity management methods and strong understanding of process safety concepts.
• Excellent written and spoken English, with good attention to detail.
• High degree of flexibility and ability to demonstrate conceptual thinking skills.
• Extensive knowledge of HSE Standards as they relate to the Oil & Gas Industry and Environment.
• Computer literate with knowledge of engineering software tools.

How to Apply
Interested and qualified candidates should send their CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.

Job Title: Project Manager

Location: Nigeria

Roles & Responsibilities

• The Individual must be responsible for the delivery of the project in accordance with contractual arrangements/agreements and financial outcome to achieve the required financial objectives.
• He shall be responsible for the review and endorsement of project summary reports (PSR), monitor all actions in respect of the risk register and project contingencies.
• He shall be responsible for on-going and active liaison with other project managers to identify and resolve issues and safeguard the interest of the business unit.
• He shall manage and coordinate all resources required to estimate, plan, monitor and report progress for the project
• The Project Manager shall lead a team of project and discipline engineers, project services personnel, and will interface widely with HSEQ, subsurface, wells, commercial & operations functions throughout the project.
• He shall also ensure control over cost, schedule and appropriate risk management by interfacing directly with the Project Services Lead and the other functions.

Qualification & Experience

• Minimum of a Bachelor’s degree in Engineering or any related technical certification
• Minimum of 8 years experience in a similar role in the oil and gas sector
• Expert knowledge in planning systems, processes and procedures
• Expert knowledge of estimating standards and practices
• Conversant with document control and managerial practices.

Method of Application
Interested and qualified candidates should send their updated CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.

Job Title: Senior E&I Engineer

Location: Nigeria

Roles & Responsibilities

• He shall be responsible for performing all aspects of design of complex Electrical and Instrumentation Engineering scope.
• He shall be responsible for the extensive progressive experience in Electrical, Instrumentation and Controls Engineering that requires applying advanced Engineering techniques and analysis
• He shall adapt to the project scope, specifications and design criteria upon assignment to a project task team
• He shall be responsible for producing estimate level designs and material take-offs suitable for the level of the estimate being performed on a project.
• He shall also be responsible for producing detail design calculations and sketches for materials of construction associated with the project. Calculations produced will be neatly prepared and organized for efficient checking by others and efficient use by drafters/designers for preparing drawings and as a deliverable when required.
• He shall produce installation details, motor control center single lines, electric room layouts, motor control elementary, connection diagrams, cable schedules, control panel layouts and grounding, lighting, power and instrumentation plans under general supervision.

Qualification and Experience

• Minimum of Bachelor’s degree in Electrical Engineering or Computer Engineering from an accredited university (Master’s degree shall be an added advantage)
• Professional Engineering registration is highly preferred but is not required.
• Minimum of 8 years of relevant industrial experience in electrical and instrumentation engineering. (Additional experience with automation and controls is highly preferred).

Method of Application

Interested and qualified candidates should send their updated CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.

Job Title: Integrated Control and Safety System (ICSS) Engineer

Location: Nigeria

Roles and Responsibilities

• He shall ensure Safety of commissioning activities including ICSS systems with effective coordination with other parties involved and In compliance with clients regulation.
• He shall manage and supervises the commissioning activities performed by a team of commissioning discipline leaders and engineers in a safe and professional manner within the frame work and priorities defined by the commissioning engineer.
• He is the technical reference for all matters related to his trade and providing solutions to technical issues in coordination with his discipline leaders’
• He shall assist PM and offshore manager in drafting and issuance of project proposals, RFP’s, tenders, budget, cash flows and preliminary schedules related to offshore activities.
• He has a clear understanding of all types of operational and organization documents related to interface with other parties (contractor, field operations, government authorities, certification authorities etc.) and ensure proper socializing with his team members.
• He shall assist commissioning manager during management meeting and provides daily progress reports as per commissioning managers requirements.

Qualification and Experience

• Minimum of Bachelor’s degree in Engineering, project or commissioning management.
• Minimum of 8 years’ experience supporting project managers in the successful delivery of developmental projects.
• Strong experience in onshore/offshore oil and gas industry regarding 1(55 and commissioning

How to Apply
Interested and qualified candidates should send their CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.

Job Title: Commissioning Manager (Mechanical)

Location: Nigeria

Roles & Responsibilities

• He shall prepare temporary Facilities and Utilities for start-up of Pre-commissioning and commissioning activities
• He shall be in charge of Process, Utilities, Mechanical completion management, Vendor coordination, Electrical and Instrumentation system
• He shall be supervise interruption between commissioning activities and construction activities.
• He shall be assist with the determination of project requirements in all aspects of the offshore activities
• He shall make a decision for the issuance of the RFC and RFSU according to the construction, commissioning and start-up plan.
• He shall manage the man-hour estimation for all the commissioning activities according to pre-commissioning and commissioning schedule.

Qualification & Experience

• Minimum of Bachelor’s degree in Engineering, Project or Construction Management,
• Over 10 years’ experience of commissioning engineering delivery of developmental projects.
• Effective communication skills including verbal, written and presentation skills.
• Proven ability to work effectively both independently and in a team based environment.

Method of Application
Interested and qualified candidates should send their updated CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.

Job Title: Cargo Operator

Location: Nigeria

Roles and Responsibilities

• He shall enable smooth load and discharge operations for the Client’s line cargo. Manages the load, discharge and trans-shipment processes for the ports within scope.
• He shell proactively resolve load list challenges avoiding cargo being left behind and improve upstream process to structurally increase the load list accuracy.
• He shall analyze root causes on unfavorable cost, identifies impacting actions and drives the implementation of cost saving initiatives a cross the team.
• He shall improve customer’s satisfaction by ensuring cargo is delivered on time to meet with project schedule.
• He shall build strong working relationships with key internal/external stakeholders, like container terminals and authorities, to continuously drive down cost, improve the product delivered to our customers and optimize processes.
• He shall closely work within the country clusters on meeting and exceeding customers’ expectations.

Qualification and Experience

• Minimum of Bachelor’s degree or HND in any related discipline
• 5years hands on experience in this role

How to Apply
Interested and qualified candidates should send their CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.

Job Title: Subsea Operations Superintendent

Location: Nigeria

Roles and Responsibilities

• He shall be in-charge of follow-up of the installation engineering activities and the implementation of safe and sound installation procedures.
• He shall implement, organize and follow-up Contractor marine spreads inspection and audit plan. Enforce and supervise marine spread upgrade plans whenever identified as required. Timely mobilize the appropriate contractor marine spreads, indusive of pre-mobilization inspections..
• He shall manage the offshore representatives on the OIMR (Offshore Inspection, Maintenance & Repairs) vessels and organize appropriate meetings and reporting to allow a proper supervision of the offshore activities.
• He shall enforce sufficient reporting process for the activities performed on and from the vessel to allow decision-making process to be done at the appropriate level within Client organization in accordance with applicable Delegation of Authority (DOA).
• He shall participate in clarification and responses to Contractor queries and requests for waivers issued for the activities performed on the vessel in accordance with project procedures.
• He shall ensure proper liaison with the rest of the OW ECP and Client organization to guaranty adequate coordination within the team fur offshore activities. Particular attention will be paid to liaise on a regular basis and as needed with the Drilling and completions, Field Operations Subsea Engineers, HSE Engineer and the SIMOPS Coordinators on the FPSO.

Qualifications and Experience

• Minimum of Bachelor’s degree in Engineering or equivalent (Generalist, Mechanical, Marine..)
• Minimum of 10 years verifiable offshore experience of sub-sea system installation/construction activities involving simultaneous operations in oil & gas of production environment (Drilling/Completions/Installation) including at least 2 years working aboard an OIMR vessel Previous experience working on a Clients asset will be an added advantage

How to Apply
Interested and qualified candidates should send their CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.

Job Title: Integration Manager

Location: Nigeria

Roles and Responsibilities

• He shall manage deployment plan and resources (i.e. project management) including when to engage with cross-program work streams required to complete tasks
• He shall actively engage with the integration and operations team to provide status report when required.
• He shall work with business units to identify, connect with and manage local end-users and key stakeholders in order to address their needs, concerns and inquiries.
• He shall liaise with corporate governance entities for operational and procedural review decisions,
• He shall escalate risks and issues through defined governance processes and manage to resolution.
• He shall integrate with other platform systems teams to ensure that end-users in their deployment are ready for conversion.

Qualification and Experience

• Minimum of Bachelor’s degree in Engineering, Projector Construction management
• Minimum of 8 years experience in similar role
• Ability to propose creative operational solutions to challenging problems and communicate business concepts and specifications dearly and efficiently.
• Ability to drive projects, establish priorities and meet critical deadlines
• Attention to detail, professional presentation skills and ability to work with complex projects.
• Proven ability to work effectively both independently and in a team based environment

How to Apply
Interested and qualified candidates should send their CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.

Job Title: Compression and Mechanical Specialist

Location: Nigeria

Roles & Responsibilities

• He shall ensure safety of commissioning of compression systems with good coordination with the parties involved and in respect with Client regulations.
• He shall manages and supervises commissioning activities of compression systems performed by a team of process commissioning supervisors and technicians in a safe and professional manner within the framework and priorities defined by the process commissioning leader.
• He shall be in charge of coordinating the contractor work execution in order to reach target start-up sequence as per project schedule.
• He shall prepare all work schedules to be performed by his team, initiate work permit, provide hazard Identification especially during SIMOPS stage of the project, propose risk mitigation measures and PPE, participate in risk assessment as required, ensure clear understanding of hazards and mitigation measures by team members before starting the job, monitor activities on site to ensure that work is performed as planned and that required precautions are implemented.
• He shall ensure that safety behavior are of the right standard and provide Improvement where necessary: socializing of procedures, understanding of hazards, trainings, safety tool box meetings to enhance safety awareness of his team.
• He is responsible for managing preparation of commissioning of compression system in respect with Opercom and all applicable specifications: Task identification, procedures, requirements for tools, vendors, equipment and man-power as required by the commissioning manager/deputy commissioning manager.

Qualification & Experience

• Minimum of Bachelor’s degree in Engineering, Project or Construction Management.
• Over 7 years’ experience of commissioning engineering in the delivery of developmental projects
• Effective communication skills including verbal, written and presentation skills.
• Knowledge of clients methodology.

Method of Application
Interested and qualified candidates should send their updated CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.

Job Title: Power Generation Superintendent

Location: Nigeria

Roles and Responsibilities

• He shall ensure safety of commissioning power generation system with effective coordination with other parties involved and in respect with Client regulations.
• He shall perform power generation system commissioning in a safe and professional manner within the framework and priorities defined by the commissioning utility lead
• He is the technical reference for all matters related to the trade and providing solutions to technical issues.
• He shall coordinate the contractor work execution in order to reach the target of start- op sequence as per project schedule during offshore phase.
• He shall coordinate daily tasks performed by his team, initiate work permit, provide hazard identification especially during SIMOPS stage of the project, and propose risk mitigation measures and PPE. Participate in risk assessment as required, ensure clear understanding of hazards and mitigating measures by team members before starting the job, monitor activities on-site to ensure that work is performed as planned and that the minimum required precautions are implemented.
• He shall manage his team within the framework and priorities defined by commissioning utility lead in view of reaching the targets with decreasing priorities, safety, quality and schedule.

Qualification and Experience

• Minimum of Bachelor’s degree in Engineering, Projector Construction management.
• Over 8 yrs. experience as a commissioning engineer in the delivery of developmental projects.
• Proven ability to work effectively both independently and in a team-based environment.

How to Apply
Interested and qualified candidates should send their CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.

Job Title: Instrument Loop Test Specialist

Location: Nigeria

Roles and Responsibilities

• He shall supervise the witnessing of pre – commissioning activities by the team of technicians as defined byte supervisor.
• Ensure that the witnessing is made in a professional way; evaluate the skills of the people performing the pre-commissioning.
• Ensure that witnessing activities do not delay activities more than necessary.
• He shall assist the supervisor for site verification to validate RFC dossier. Raise additional punch list items which are not recorded and report any non-conformity to the commissioning instrumentation lead.
• He shall assist the supervisor during commissioning preparation such as tools preparation, commissioning work dossier.
• He shall perform instrument loop test with respect to the work package in a professional manner, in accordance with Client specification.
• He shall ensure that site standing instructions, site operating procedure arid additional operating procedure such as SIMOPS are known by the team and enforced.
• He shall stop any hazardous situation and immediately reports to the site commissioning instrument supervisor/superintendent.

Qualification and Experience

• Minimum of Bachelor’s degree in Instrument Engineering or its equivalent.
• Over 7 years’ experience as an instrument-commissioning engineer in the delivery of developmental projects.
• Knowledge of instrument safety, wiring, and protection rules etc.
• Proven ability to work effectively both independently and in a team-based environment.

How to Apply
Interested and qualified candidates should send their CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.

Job Title: Operations and Installation Manager

Location: Nigeria

Roles and Responsibilities

• He shall be responsible for the delivery of safe, efficient and effective Installation engineering procedures to deliver the project scope.
• He shall ensure that the contractor is competent and has a high standard of resources to deliver the Installation engineering scope of the project.
• He shall deliver robust and optimized installation engineering execution plans, managing the performance, including schedule and budget of the installation contractor against project plans.
• He shall lead installation studies and manage the interface with production support of installation and construction document development.
• He shall support the management of risks through participating and leading formal risk reviews with the contractor and inputting to the risk management process.
• He shall maintain awareness of and ensure compliance with all appropriate elements of the project, segment and group requirements.

Qualification and Experience

• Minimum of Bachelor’s degree in quantitative or technical discipline
• Minimum of 10 years’ experience in onshore / offshore installation and logistics field.
• Experience in managing construction contractors and the development of installation engineering and procedure development and track record of driving positive safety culture and behavior.

Method of Application
Interested and qualified candidates should send their updated CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.

Job Title: Offshore Process Manager

Location: Nigeria

Roles and Responsibilities

• He shall ensure that the pre commissioning & commissioning activities are planned and are fully integrated with the project construction schedules.
• He shall liaise with the commissioning discipline leads (utilities, electrical, instrumentation and others). To ensure that all process and utilities systems are fully covered.
• He shall participate in the key design reviews such as P & ID, Equipment layout and HAZZOP etc. to ensure that the pre -commissioning& commissioning requirement are incorporated into the design of the facilities.
• He shall manage the commissioning of the project systems and sub unit. Ensure that the utility and support system are commissioned and available to support the pre – commissioning and commissioning activities for the facilities.
• He shall provide an interface between operations organization and the contractor PMT for commissioning related issues and the utilization of the operations workforce during pre -commissioning, commissioning activities and on the job training during this period.
• He shall prepare plans for transition of the projects from project management team to the operations organization at appropriate stage of the project.

Qualification and Experience

• Strong academic background with a relevant degree in Engineering.
• Minimum 10 years’ experience including extensive lead experience in Oil & Gas project.

How to Apply
Interested and qualified candidates should send their CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.

Job Title: Valve Replacement Specialist

Location: Nigeria

Roles and Responsibilities

• He shall be responsible for assimilating the Project scope and the technical requirements including the applicable regulations, the Project specific Design Basis and philosophies, the applicable Specifications and International codes and standards for Valves.
• He shall ensure the scope of the valves engineering are fully implemented and control deliverables in terms of quality, schedule & HSE as per Projects requirements.
• He shall guide & check the valve specifications, technical specifications, technical Bid evaluation, specialty items, responsible for the Vendor drawing review; Interacts with contractors/vendors and other engineering disciplines as required; Reviews and approves specified contractor purchase order/subcontract packages for piping and valves materials
• He shall be responsible for large bore valves and follow-up, guidance and review of the valves related design and selection; supervises the EPC scope finalization with relation to the engineering discipline.
• He shall liaise as required with Client’s shareholders Technical Authorities (TA) and committees, monitors material acquisition including requisitioning, fabrication, testing and transportation of the piping and valves materials.
• He shall drive and obtain all necessary input required for the timely and complete progress of the valves materials engineering; drives and Reviews the Acoustic and Flow Induced vibration and Small Bore connections design.

Qualification and Experience

• Minimum of Bachelor’s degree in Mechanical Engineering. (Advanced degree is desirable.)
• 10 years of relevant experience as Valves specialist in the oil and gas industry.
• Hands on experience in material and valve management. Knowledge of type testing like fugitive emission, Cryogenic & Fire Safe tests.
• Significant experience in working with FEED/EPC Contractors and interfacing with equipment suppliers.
• Competent and sound material and corrosion knowledge for piping and valves.
• Demonstrated ability and sensitivity to work with people from a variety of cultural backgrounds.
• A high level of proficiency in written and spoken English
• Proficiency in MS Office and other relevant applications such as SM3D, CAESAR and other piping Engineering Tools.
• Excellent communication / written skills and ability to work with different disciplines.
• High awareness of safe working practices associated with design, construction, installation, pre-commissioning and commissioning of offshore pipelines and facilities.

Method of Application
Interested and qualified candidates should send their updated CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.

Job Title: Topside Lead Specialist

Location: Nigeria

Roles and Responsibilities

• He shall be responsible for the delivery of a functional Topside package.
• He shall plan, define and manage Topside package equipment delivery (mechanically complete) as well as their timely issuance to support integration activities.
• He shall monitor compliance with client based on design, project and corporate specifications (supported by engineering team). Ensure that cost of package delivery are minimized and project schedule is maintained.
• He shall have functional knowledge of contracts, drawings, estimates and specification to ensure compliance with project requirements.
• He shall provide management support during construction, mechanical completion, pre-commissioning and commissioning through to start-up and including during operating regime.
• He shall implement the organizational strategy to achieve maximum operating unit profit.

Qualification and Experience

• Minimum of Bachelor’s degree in Engineering or any related technical certification
• Minimum of 7 years’ experience in similar role and environment.
• Experience in FPSO projects.
• Good use of Microsoft work and Microsoft excel
• Ability to write technical reports.
• Experience in delivery of Topside packages.

Method of Application
Interested and qualified candidates should send their updated CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.

Job Title: Rotating Equipment Specialist

Location: Nigeria

Roles and Responsibilities

• He shall manage, plan, supervise and support day-to-day rotating equipment activities I.e. ensuring the safety of all team personnel and structured delivery of the work scope and processes. Ensuring all applicable site/Project safety procedures are fully and properly implemented.
• He shall manage the mechanical systems administrator and provide daily rotating equipment and mechanical systems support to the plant to keep the plant system operational.
• He shall use sound engineering practices, plant standards and specifications, ensuring that documentation for the mechanical systems are maintained properly.
• He shall develop and use computer-assisted engineering and design software to perform engineering tasks and develop documentation.
• He shall provide technical support, troubleshooting and assist in planning and coordinating work for maintenance department.
• He shall be responsible for tackling availability and determining the overall reliability of the equipment throughout the plant (pumps, compressors, blowers, submerged combustion vaporizers, gas turbine generators, diesels drivers etc.).

Qualification and Experience

• Minimum of Bachelor’s degree in relevant Engineering discipline.
• Minimum of 7 years’ experience in similar role.
• Fully conversant with project management systems with extensive knowledge of construction/completion/commissioning practices.
• Documented success in proactively improving processes and systems.

Method of Application
Interested and qualified candidates should send their updated CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.

Job Title: Senior HVAC Engineer

Location: Nigeria

Roles & Responsibilities

• He shall oversee the commissioning activities of HVAC systems and assist with the determination of project requirements in all aspects of the offshore activities.
• He shall coordinate the issuance of RFC and RFSU for HVAC systems according to the construction, commissioning and start up plan.
• He shall organize the man-hour estimation for HVAC commissioning and maker S/E management according to pre-commissioning and commissioning schedule.
• He shall manage the priority for the commissioning activities of HVAC systems in accordance with project milestones.
• He shall supervise the ducting and vessel preparation activities as chilled water instrument air, electric power supply, room completion, HVAC equipment installation progress, liaise with start-up and operation engineer.
• He shall support the pre-start up activities of HVAC systems based on the Client requirements and procedures.

Qualification and Experience

• Minimum of Bachelor’s degree in Engineering, Project or Construction Management.
• Over 7 years’ experience as a commissioning engineer in the delivery of developmental projects.
• Effective communication skills including verbal, written and presentation skills.
• Proven ability to work effectively both independently and in a team based environment.

Method of Application
Interested and qualified candidates should send their updated CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.

Job Title: Offshore Installation Manager

Location: Nigeria

Roles and Responsibilities

• He shall monitor the activities leading to the smooth and successful completion of the offshore installation works so that all such works offshore can be completed as part of handover to client, particularly the following: to work in close coordination within the client and contractor interface manager for the related works and to work in close coordination within the clients related discipline leads for commissioning offshore.
• He shall conduct daily meetings with the stakeholders for offshore installation works and conclude the job cards including completion of punches.
• He shall monitor the offshore installation related construction/commissioning works for prompt project management support as field so that the particular job cards and pre-determined logical steps can continue uninterrupted within the allocated time.

Qualification and Experience

• Minimum of Bachelor’s degree in Engineering, Projector Construction management.
• Minimum of 8 years construction experience in related offshore projects.

How to Apply
Interested and qualified candidates should send their CV to: jobopening@dbesl.com using the Job Title as the subject of the mail.