Job Opportunities at Mar & Mor Engineering Services Limited

Job Title: Project Electrical Engineer

Location: Ikeja, Lagos
Employment Type: Full-time

Job Description

• Electrical site engineers design the main power systems that feed commercial buildings and offices as well as the distribution circuits to each unit.
• They also handle design problems when they arise. Electrical plans are never 100 percent correct, and changes will always have to be made.
• These changes are the responsibility of the electrical site engineer.

Job Responsibilities

• Managing and maintaining building services, such as lighting, heating, ventilation and lift systems
• Carrying out feasible Working with high and low voltage equipment
• Managing power generation, transmission and distribution
• Designing systems and products
• Working with renewable energy sources
• Managing and maintaining building services, such as lighting, heating, ventilation and lift systems
• Carrying out feasibility studies for new technical developments
• Drawing up project plans, making models, prototypes and circuit diagrams
• Budgeting, Estimating timescales
• Overseeing the work of technicians and craftspeople
• Testing installations and systems
• Making sure projects meet safety regulations
• Overseeing inspection and maintenance programmes
• Liaising with clients

Requirements

• B.Sc, B.Tech / HND or M.Sc. (or its equivalent) in Electrical Engineering from a reputable and accredited higher institution of learning.
• Minimum of 5 years post NYSC relevant experience working Engineering services
• Must be a registered member of COREN & NSE.
• Candidate must have previous experience in site management.
• Candidate must have 5 years’ relevant previous experience in similar role.

Job Title: ELV Design Engineer

Location: Ikeja, Lagos
Employment Type: Full-time

Job Role

• Understanding the Technical specifications andTender contract.
• Preparation of Technical Datasheets/ Specifications, Control schematics,
• System Architecture.
• Preparation of Bill of Quantities with necessary quantity break-up. Preparation of BMS IO summary.
• Preparation of Project Budgetary cost.
• Systems: Fire Alarm, Public Address, CCTV, Access Control, VESDA,
• Communication System, Parking Management System, Building
• Management System, Data Centre design, Water Leak Detection system,
• Intrusion Detection System.
• Managing a team of ELV design engineers proficient in ELV systems and on-site building practices.
• Responsible for the design review of the IT, Telecom, ELV, Security and Fire Alarm services.
• Participation in design review meetings and workshops. If required.
• Preparation of meeting records, design review and design progress reports.
• Liaise with Local suppliers / Contractors to ensure adherence to standards and scope of works required by client.
• Validate & check design drawings for IT/ Communications Systems & Security construction phases of the project.
• Other duties as assigned.

Requirements

• Bachelor Degree in relevant space
• 4+ Years epxperience in ELV designs and tendering
• Strong organizational skills required; including good time management skills
• Good analytical abilities
• High level of proficiency in AutoCAD
• Strong Leadership skills; planning and organizational skills
• Good interpersonal skills, including teamwork, facilitation and negotiation
• Must have experience with Project Management Tools like MS Projects and MS Office
• Excellent communication skills
• Ability and comfort interacting with all levels of management, business leaders and technology stakeholders

Job Title: AC Technician

Location: Ikeja, Lagos
Employment Type: Full-time

Job Summary

• Air conditioning technicians perform various functions to see to it that air conditioning systems and related equipment and facilities work effectively and efficiently.
• Air conditioning (AC) technicians work with cooling systems to ensure proper installation, maintenance and repair.
• Generally, AC technicians have a high school diploma or with a certification in HVAC or building maintenance technology.
• Successful technicians are detail oriented with strong manual dexterity and problem-solving skills.

Job Description

• The air conditioning technicians install, inspect, maintain, and repair air conditioner.
• They ventilate equipment and controls making sure they operate efficiently and continuously.
• They perform regular maintenance work on cooling units.
• They diagnose electrical and mechanical defects and malfunctions.
• They install, replace, or repair equipment that has been damaged.
• They make adjustment and do calibrations of thermostatic controls.
• They install new air-conditioning systems and equipment.
• They clean blowers and coils, check tensions of belts and motors.
• They make plans and designs of new air-conditioning systems including their installation and maintenance.

Job Qualifications and Requirements

• High School Diploma or equivalent; Certificate in AC, Building Maintenance Technology or relevant field will be a plus
• Trade Test iii, ii, and i certificate or Nabteb Certificate
• Basic understanding of hydraulic and other systems
• Working experience maintaining and repairing heating ventilation and air conditioning (HVAC) systems and other related systems

Job Title: Plumbing Supervisor

Location: Ikeja, Lagos
Employment Type: Full-time

Responsibilities

• Plans and develops work schedules, equipment usage schedules, priority of plumbing expenditures, and procedures for plumbing systems maintenance.
• Estimates material and labour.
• Monitors the acquisition and use of materials.
• Maintains time, payroll, and material records and submits reports as required.
• Trains or informs employees of new work methods or procedures, changes in safety regulations, work policies, and plumbing codes.
• Ensures budgetary guidelines are met; prioritizes expenditures to stay within budget and assists in the preparation of capital and operations budgets.
• Interprets University and department policies to assigned personnel, enforces safety regulations, and adheres to proper codes and standards.

  Requirements

• Trade Test certificate, Nabteb or SSCE
• Adopt knowledge of Health, Safety and Environmental Management (HSE)
• Proven experience in plumbing services
• Ability to effectively communicate with people at different levels within the organization.
• Demonstrated ability to work in a team environment or independently, flexibility to adapt to changing needs/situations.
• Knowledge of the tools, equipment, and materials common to the plumbing trade.
• Knowledge of applicable plumbing codes.
• Knowledge of supervisory principles, practices, and techniques.
• Knowledge of the mechanics of operation of equipment such as pumps, boilers, heaters, and other plumbing components.
• Skill in the installation, repair, and maintenance of all types of plumbing systems.
• Skill in estimating time and materials common to the trade.

Job Title: QA / QC Engineer

Location: Ikeja, Lagos
Employment Type: Full-time

Job Description

• Accountable for the quality and workmanship of every activity, precise knowledge of all aspects of engineering construction relating toBuilding Services and Engineering discipline interfacing the multidisciplinary processes.
• Responsible for QA/QC documents of the complete project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered, and other important QA/QC documents.
• Develop and determine all standards to perform inspection and tests on all procedures and oversee all testing methods and maintain high standards of quality for all processes.
• Review the quality of all materials at the site and ensure compliance with all project specifications and quality and collaborate with the department for all material procurement and maintain a quality of materials.
• Supervise the effective implementation of all test and inspection schedules and ensure adherence to all procedures and coordinate with various teams to perform quality audits on processes.
• Assist with employees to ensure knowledge of all quality standards and ensure compliance to all quality manuals and procedures and collaborate with contractors and suppliers to maintain the quality of all systems.
• Manage to lift all types of equipment and handle the efficient storage of all hazardous materials and perform quality audits as per the required schedule.
• Analyse all products and non-conformance processes and evaluate all documents to ensure the maintenance of optimal quality and prepare monthly reports to evaluate performance.
• Monitor an efficient system and record for all project activities and analyse all processes to ensure all work according to quality requirements.
• Manage all work methods and maintain knowledge on all quality assurance standards and monitor continuous application for all quality assurance processes and recommend corrective actions for all processes.
• Develop a method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and Checklist based on specifications of the project.
• Liaise with the Technical Engineer for submission of material submittals to Consultant
• Coordinate with the consultant’s representative and Site In-charge for inspection.
• Report to the QA/QC Manager, control, and monitor all activities related to Quality.

Requirements

• B.Sc, B.Tech / HND (or its equivalent) in MEP Engineering from a reputable and accredited higher institution of learning.
• Project Management Professional (PMP) certification will be an added advantage.
• Must be a registered member of COREN & NSE.
• At least 5 years of construction experience with working knowledge of mechanical, electrical and plumbing
• Construction procedures and practices
• Computer literate
• Possess excellent communication and organizational skills

Core Skills:

• Excellent written and verbal communication skills
• Ability to work in a cross-functional team environment
• Extremely detail-oriented
• Great troubleshooting skills
• Working knowledge of product development and manufacturing processes
• Excellent organization and time-management
• Ability to juggle multiple projects simultaneously
• MS packagesproficiency

Job Title: Draftsman

Location: Ikeja, Lagos
Employment Type: Full-time

Responsibilities

• Creating and altering construction sketches.
• Ongoing drawing focused collaboration with project managers and design consultants.
• Management and organization of all Emergent CAD drawings.
• Printing of CAD drawings in various formats and packages, and delivering them to the correct contact in a timely manner.
• Creating accurate CAD drawings from hand sketches, verbal instructions, and site visits.
• Seamlessly integrating and working with project managers design consultants, and sub-contractors, to produce and alter drawings.
• Thinking creatively and critically to support the project team in the design process, to create sketches and drawings that work.
• Creating and continually updating project drawings lists.
• Printing various formats of drawing sets for project managers and site superintendents.
• Systematically saving sketches and drawings on our CAD server; keeping the server organized; updating project folders and files as jobs progress and revisions are made.
• Exhaustively reviewing and checking sketches and drawings for errors, before being sent to architects, subcontractors, project managers, etc.
• Seeking clarity and understanding from engineers and project managers when you are not 100% certain of something.
• Organizing and uploading drawings to web based storage sites/collaboration project sites to share drawings with project and subcontractors.
• Create, edit, and update standard details for use in projects.

Requirements

• OND / HND in Engineering.
• Degree from a technical college also acceptable.
• Experience in computer-aided design and drafting (AUTOCAD).
• Ability to draw manually favourable, but not essential.
• Ability to work well in a team and on your own.
• Ability to respond well to criticism and maintain a positive attitude.

Job Title: Design Engineer (Electrical)

Location: Ikeja, Lagos
Employment Type: Full-time

Job Summary

• Electrical Design Engineer in the design of the electrical system like earthling, lighting, cabling, preparation of single line diagram, communication, fire alarm etc. including system calculations and drawing preparation.

Job Duties

• Plans and schedules assigned work and determines staffing needs to meet the project milestones and assumes responsibility for meeting man-hour budget and project schedules for all work assigned to the group or subordinate personnel
• Monitors work for compliance with approved design standards and to provide for efficient and quality design, reliable plant operation and economy.
• Plans, Schedules, conducts and co-ordinates with minimal supervision.
• Receives technical guidance from Group Leader, Design Supervisor or Electrical specialists only on unusual or complex problems, performs 3D modelling extraction from 3D model 2D drafting when required.
• Supervises and prepares design and drafting procedures to standardize the design effort.
• Supervises and reviews quantity take-offs.
• Reviews and defines engineering scope changes as required.
• Endorses or prepares reports for work progress for project discipline use.
• Maintains up-to-date knowledge of computer applications to design work and promotes maximum and efficient use of computers.
• Assists less experienced personnel in the performance of their assigned tasks.
• Performs interdisciplinary checks.
• Assists Lead Engineer in maintaining project Contract review, KPI, Change Tracking, Schedule Tracking, Productivity and dashboard reporting, Value Engineering, Lesson Learnt etc.
• Review design documents, Subcontractors/ Vendor documents for technical compliance.
• Performs technical audits as and when required.
• Prepares, reviews or monitors project controls, cost estimates, quantity take-offs and manpower requirement.
• Gives on-the-job training, promotes development of subordinates, evaluates and counsels assigned personnel.

Requirements

• B.Sc, B.Tech / HND or M.Sc. (or its equivalent) in Electrical Engineering from a reputable and accredited higher institution of learning.
• Minimum of 5 years post NYSC experience working in same capacity and industry
• Must be a registered member of COREN & NSE.
• Candidate must have expertise in AutoCAD and Revit as an added advantage
• Candidate must have 5 years’ relevant previous experience in similar role and ability to lead.